GC parts

Includes PS2, Xbox 1, GameCube (but not the Phantom Game Console)

Moderator: Moderators

Zzebotes13
Posts: 330
Joined: Thu Jan 19, 2006 3:27 pm
Location: Somewhere in the big Apple

GC parts

Post by Zzebotes13 »

I just opened up my gamecube and was wondering if anyone knew what the little spring like things on the memory card slots are for. They are silver and when screwed in they connect to the back of Gamecube's controller board in the front. Do i need them to play?
I will always put 8) at the end of my posts
Image
gannon
Moderator
Posts: 6974
Joined: Sun Apr 04, 2004 4:48 pm
Location: Near that one big lake
Contact:

Post by gannon »

Sounds like shielding or ground for the memory card.
Zzebotes13
Posts: 330
Joined: Thu Jan 19, 2006 3:27 pm
Location: Somewhere in the big Apple

Post by Zzebotes13 »

do i need to keep them in order to play
I will always put 8) at the end of my posts
Image
Gamelver
Moderator
Posts: 3352
Joined: Sun Apr 04, 2004 9:03 pm
Location: in my basement, to forever work on portables ;)

Post by Gamelver »

nope
Without games my life would have no meaning.
Well, I guess it would, but it would be a lot less fun!!!!!!!

Image
Zzebotes13
Posts: 330
Joined: Thu Jan 19, 2006 3:27 pm
Location: Somewhere in the big Apple

Post by Zzebotes13 »

another question. has anyone opened up one of the nintendo brand batteries for the gc. if so, how big are they. i just started my portable. going to buy the screen tomorrow and wanted to know if i should get the battery to.. just as a temporary bat until i have some cash. :lol: and once the battery is open, can i easily connect it to a gaecube that's completly out of its case. Please help :cry:
I will always put 8) at the end of my posts
Image
elementxmaster
Posts: 214
Joined: Sat Oct 22, 2005 12:14 pm

Post by elementxmaster »

I've taken apart a gamecube battery, it isn't that heavy, it's roughly the same weight as 2 7.2 RC radioshack batteries, but these are much easier to recharge as they recharge via the gamecubes own power cable. Here a few photos of it..
http://img413.imageshack.us/my.php?imag ... 0011ef.jpg
http://img365.imageshack.us/my.php?imag ... 0017di.jpg
http://img365.imageshack.us/my.php?imag ... 0021sn.jpg
http://img377.imageshack.us/my.php?imag ... 0035gb.jpg

Sorry about the pics being fuzzy..
Zzebotes13
Posts: 330
Joined: Thu Jan 19, 2006 3:27 pm
Location: Somewhere in the big Apple

Post by Zzebotes13 »

thanks, but what brand of battery is that. I know think that the intec batteries connect from the bottom some how, if not, that would be great. :lol:
I will always put 8) at the end of my posts
Image
elementxmaster
Posts: 214
Joined: Sat Oct 22, 2005 12:14 pm

Post by elementxmaster »

Um...you're kinda wrong...

The battery does ATTACH to the base of the gamecube, but it doesn't mean that the CABLE DOES. As you can see in the pictures there is a cable, THAT connects into the gamecubes power slot, which then powers the whole thing up including the screen for 2 hours. Even if you take the circuits out of the case, the battery still works by plugging the cable into the power slot.

You can use any brand you want, but you have to be careful when taking it out, I took the circuits out by soldering the sides of the plastic very carefully and I didn't damage the circuits :D . Remember to be careful here.
Harshboy
Portablizer
Posts: 3610
Joined: Tue Oct 11, 2005 3:44 pm

Post by Harshboy »

eh....can't you just open it with a screwdriver? I know it might have Nintendo screws, but that aint a problem for me.
Zzebotes13
Posts: 330
Joined: Thu Jan 19, 2006 3:27 pm
Location: Somewhere in the big Apple

Post by Zzebotes13 »

just got back from shopping for parts. I went to 4 Gamestop's, 2 EB-Games, a toys'r'us, a circuit city, and target and i couldn't find a screen or battery. I Guess i'll hust have to order it from Best Buy.com. the good thing is the shipping is fast and cheap. I'll post pictures next week, my GCp should be done by then. :P By the way Harshboy, i was wondering where you but your L, R, and Z buttons on your portable :?
I will always put 8) at the end of my posts
Image
Harshboy
Portablizer
Posts: 3610
Joined: Tue Oct 11, 2005 3:44 pm

Post by Harshboy »

i have been working on it lately, and and i cut off some box for the area where the controller is...and just put them on the back
Zzebotes13
Posts: 330
Joined: Thu Jan 19, 2006 3:27 pm
Location: Somewhere in the big Apple

Post by Zzebotes13 »

i bought a new Mad Catz controller today and was wondering if i could just rip off the rumble. I'm too lazy to desolder it.
I will always put 8) at the end of my posts
Image
Turbo Tax 1.0
Portablizer Extraordinaire
Posts: 4773
Joined: Wed Mar 30, 2005 6:19 pm
Location: Delaware, no sales tax
Contact:

Post by Turbo Tax 1.0 »

if its soldered on with wires and not directly to a pcb, then rip away :D
when life gives you lemons make flux
Image
snesp mk4
Zzebotes13
Posts: 330
Joined: Thu Jan 19, 2006 3:27 pm
Location: Somewhere in the big Apple

Post by Zzebotes13 »

Does anyone know the dimensions of the Gamecube battery is when opened up :( Please help, need to finish my Gcp and i don't want a battery that is too big to fit in my portable. :cry:
Last edited by Zzebotes13 on Tue Feb 21, 2006 3:00 pm, edited 1 time in total.
I will always put 8) at the end of my posts
Image
Zzebotes13
Posts: 330
Joined: Thu Jan 19, 2006 3:27 pm
Location: Somewhere in the big Apple

Post by Zzebotes13 »

BY dimensions, i mean the actual battery pack, not the casing

Edit: didn't mean to double post, wasn't watching where i was clicking :P too busy watching Family Guy movies
I will always put 8) at the end of my posts
Image
Locked