How to add leds to a PAL SNES ???

Includes but not limited to: SNES, Genesis, Sega CD, PlayStation 1, Nintendo 64, Dreamcast, Game Gear and I guess the Virtual Boy.

Moderator: Moderators

Post Reply
BDC
Posts: 4
Joined: Sun May 02, 2010 12:19 pm

How to add leds to a PAL SNES ???

Post by BDC »

Hi everyone!

I recently bought an PAL snes and the case was yellow from the aging...
So now I'm goint to casemod it by adding plexiglass and painting it.


I'd also like to add a few leds... 4 underneath the sticker on the upperright corner (with the 4 colors on it)

And i'll cut out the air-roster on the front and add a grid in that place... behind that grid i want 8 leds (or maybe 12 for an equal spread of light)



SO... where do i connect those 4 + 8 leds to?
And how much V should these leds be?

I'm a total noob into this... but with the right description I'm sure I'll pull it off :)
Top
nevermind1534
Senior Member
Posts: 1977
Joined: Fri Feb 06, 2009 1:36 pm
Steam ID: nevermind1534
Location: Detroit, MI
Contact:
Contact nevermind1534

Re: How to add leds to a PAL SNES ???

Post by nevermind1534 »

The LEDs should just be able to connect in parallel to where the power LED is hooked up. Or you could use resistors and pull it off of any input. If you want LEDs, I can sell some to you with matched resistors for 5V or 12V input (no resistor needed for 3V).
Kyo wrote:"does anyone here know how to fly a plane?"

"STAND BACK EVERYBODY, I HAVE A FAKE ID"
Top
BDC
Posts: 4
Joined: Sun May 02, 2010 12:19 pm

Re: How to add leds to a PAL SNES ???

Post by BDC »

nevermind1534 wrote:The LEDs should just be able to connect in parallel to where the power LED is hooked up. Or you could use resistors and pull it off of any input. If you want LEDs, I can sell some to you with matched resistors for 5V or 12V input (no resistor needed for 3V).
So I am able to connect them all parallel to the power led and they'll light up very bright?
I need them to be extremely bright so that it's visible from under the sticker in the upperright corner :)

Well I doubt it will be cheap for me to buy them from you... I'm from Belgium/Europe so shipping them to here will be quite expensive :)
Top
gamer255
Posts: 336
Joined: Mon Sep 14, 2009 7:53 pm
Location: New york

Re: How to add leds to a PAL SNES ???

Post by gamer255 »

The yellowing is easy to fix :P
Top
BDC
Posts: 4
Joined: Sun May 02, 2010 12:19 pm

Re: How to add leds to a PAL SNES ???

Post by BDC »

gamer255 wrote:The yellowing is easy to fix :P
It's not from sigarette smoke... it's the top layer of the plastic that changed color due to contact with air :)
Anyways... the whole console is taken apart now and ready to spraypaint :)
It should be done tomorrow or the day after...




Edit: Would anyone know a place to buy a sticker with the snes or nintendo logo on a white background???
Last edited by BDC on Sun May 02, 2010 1:27 pm, edited 1 time in total.
Top
gamer255
Posts: 336
Joined: Mon Sep 14, 2009 7:53 pm
Location: New york

Re: How to add leds to a PAL SNES ???

Post by gamer255 »

I know that it's the air contact. It's easy to fix .
I have done it before.
Top
nevermind1534
Senior Member
Posts: 1977
Joined: Fri Feb 06, 2009 1:36 pm
Steam ID: nevermind1534
Location: Detroit, MI
Contact:
Contact nevermind1534

Re: How to add leds to a PAL SNES ???

Post by nevermind1534 »

BDC wrote:Well I doubt it will be cheap for me to buy them from you... I'm from Belgium/Europe so shipping them to here will be quite expensive :)
Shipping should only about $1.23. PM me if you're interested.
Kyo wrote:"does anyone here know how to fly a plane?"

"STAND BACK EVERYBODY, I HAVE A FAKE ID"
Top
BDC
Posts: 4
Joined: Sun May 02, 2010 12:19 pm

Re: How to add leds to a PAL SNES ???

Post by BDC »

gamer255 wrote:I know that it's the air contact. It's easy to fix .
I have done it before.
How did you do it???


Nevermind1534 I've contacted you trough PM :)
Top
Hifeno
Portablizer Extraordinaire
Posts: 666
Joined: Sat Jul 19, 2008 4:12 pm
Location: Seneca SC
Contact:
Contact Hifeno

Re: How to add leds to a PAL SNES ???

Post by Hifeno »

Ya how do you fix yellowing snes consoles without case swaping.
That's Hacking Awsome
Image
Visit my Website http://hifeno.webs.com/" onclick="window.open(this.href);return false;
Top
snowpenguin
Posts: 1306
Joined: Thu Jun 11, 2009 4:10 pm

Re: How to add leds to a PAL SNES ???

Post by snowpenguin »

Sand it?
Image
Top
Post Reply

Return to “1990's Gaming”