What I want to do, is a genny inside a GameBoy case. I'll use A and B as A and B (
It's going to be like this:
- Black matt color.
- Radica mask rom + card edge connector.
- Headphone port, USB female port for A/V output (1 = Vsig, 2 = Asig, 3 = Vss, 4 = N/C).
- Power jack (+5V).
- 4 AA batteries.
- The cart edge connector is going to be placed on the back, facing down.
My equipement is:
- JBL 14S soldering iron.
- JBL flux.
- 0.5 mm soldering fluid with flux on the inside.
- AWG 30 single-wire.
- Case.
- Paint.
- Sanding paper.
I'm getting soon:
- Radica Mega Drive (japanese version), ships from Play Asia Monday.
- 2.5" or similar LCD active matrix screen, that takes composite.
- Desoldering pump.
- Transparency paper (for Mega Drive logo, etc...).
- A new TriWing screwdriver (I lost mine
So well, if you have some suggestion, please tell me! I'll start with this Monday, and post updates as soon as posible!
Cheers, people!