Wishing for Composite In....

jeffslot · Post by **jeffslot** » Thu Jan 25, 2007 7:55 am

Hi guys,

Can you guys please give me your opinion if the below picture contains video composite in? I though that was VCC might stand for. Thanks.

<a href="http://img253.imageshack.us/my.php?imag ... ard5st.jpg" target="_blank"><img src="http://img253.imageshack.us/img253/5377 ... 5st.th.jpg" border="0" alt="Free Image Hosting at www.ImageShack.us" /></a>

Jeff S

myersn024 · Post by **myersn024** » Thu Jan 25, 2007 11:22 am

The board that you're looking at appears (to me) to be the driver board for the backlight. However, if you have a multimeter you could just test for continuity between the positive input (that the part on the inside of the yellow RCA plug) of the composite video input on the other board in your pic. Chances are that the point you've circled is some kind of ground. Once again, that could be tested with a multimeter.

tom61 · Post by **tom61** » Thu Jan 25, 2007 8:35 pm

VCC is voltage, aka, power.

Labels to look for: C, Y/C, or CVBS

Post by **Skyone** » Thu Jan 25, 2007 9:26 pm

Oh, NOW you take a good picture.

Vcc=+5v

Is that an intec screen pad? Couldn't think of what else it looks to be.

jeffslot · Post by **jeffslot** » Fri Jan 26, 2007 5:50 am

Nah, this is a venturer portable dvd player. I took it apart because I was hoping it would be similar to the below post from Fluffy.

http://fluffy373.tripod.com/dvd2/index.html

but it doesn't seem similar at all. Here are some more pictures of mine.

back mainboard

http://img246.imageshack.us/img246/9259/img00024go.jpg

top mainboard

http://img293.imageshack.us/img293/7462/img00034ys.jpg

lcd controller board

http://img246.imageshack.us/img246/8533/img00052li.jpg