ok I really feel like crying right now. I connected all the wires to relocate the cart slot but when i plugged the adapter in something must have happened and now the power led wont turn on now. I tried to connect the adapter to another n64 but same thing -no power led.
Do I need to replace my adapter or did i fry my board? Please help!
Help!
Moderator: Moderators
-
marshallh
- Moderator
- Posts: 2987
- Joined: Sat Sep 10, 2005 2:17 pm
- 360 GamerTag: marshallh
- Location: here and there
- Contact:
You have a short somewhere (two wires crossing/touching each other.)
The power brick flipped its breaker to keep from frying itself. You N64 is most likely okay, and your power brick will reset in about a day's time.
Look carefully for spots where you may have messed up. Check for little bits of solder, turn the board upside down and shake it to see if anything falls off.
The power brick flipped its breaker to keep from frying itself. You N64 is most likely okay, and your power brick will reset in about a day's time.
Look carefully for spots where you may have messed up. Check for little bits of solder, turn the board upside down and shake it to see if anything falls off.
-
Gamefreak271
- Posts: 56
- Joined: Tue Feb 14, 2006 12:56 am