GCP Handheld

extremesonic · Post by **extremesonic** » Sat Sep 03, 2005 12:52 pm

mikm240 wrote:wow i use emulators (only on pc) didnt know u could get them to the cube if u could tell me how i liked to know

http://forums.afterdawn.com/forum_view.cfm/112 read up, ask some questions and you'll see how its done.

zenloc · Post by **zenloc** » Sat Sep 03, 2005 1:05 pm

if i find a good battery i'll let you know

and a modchip is this is let's you play copies games on your gamecube and there are emulators for it so you can then burn the roms and emulator in the disk and then play it on the gamecube

and the network adapter is ver smal en thin and the modchip the same that doesn't really use up anyspace there going to be in my portable 100% the hdd just replaces the lens so that it plays games of the hdd and not of the lens\

and don't forget i'm making the lens with the case gamlever made his outside of the case that means mine will look a bit cleaner but will be a bit thicker i think. but who know i might think of something else to slim it down even more

EDIT:: can someone anwser this question for me:

if i have a 14,8v 1500 mah battery and a 3,7v 4000 mah and link um parallel do i then get a 14,8v 5500 mah battery??

shmagoogin77 · Post by **shmagoogin77** » Sat Sep 03, 2005 2:50 pm

ya i think it would get 5500mah and 14.8v

cennar · Post by **cennar** » Sat Sep 03, 2005 3:26 pm

wow i see that your gc has taken over the world... and it speaks german. cool!! looking foward to it!! i like thew gba junk.. you know you can use the gbamovie thing on it right? that would be cool

zenloc · Post by **zenloc** » Sat Sep 03, 2005 3:44 pm

german???

i don't quite get it if you looked on the picture ad saw the text you might me mistken i'm dutch you know holland everybody mixes up the german and the dutch and yes i knew that i could use a gba movie player

having a gba player built in has certain advantages

and thanks on the anwser of that battery question but just another thing

does it matter if the 14,8 battery is a lithium ion and the 3,7 4000mah battery a lithuim polymer

i can just link them parralel right just when i charge them i'll will charge them seperatly??

mikm240 · Post by **mikm240** » Sat Sep 03, 2005 6:13 pm

its not recommended to run differnt kind of batteries with differnt voltages and amps together. they might work fine or they might not work together.
ive done a set up with the same principle only i did lithium polymer and rc batteries and its work fine ive just been warned its not recommended

plus unless there gana be removable packs it might be a pain to charger
and u couldnt play the system wile charging

mikm240 · Post by **mikm240** » Sat Sep 03, 2005 9:13 pm

what are u making the case out of?

mikm240 · Post by **mikm240** » Sat Sep 03, 2005 9:51 pm

o and if ur run batteries with differnt voltages and differnt mAh u might not get a good amount of mAh at least in series u dont. u get like the ratio or somthing i dunno some else told me but yea just check that out before u buy expensive lithium batteries.

soundwave · Post by **soundwave** » Sat Sep 03, 2005 10:10 pm

The 14.8 and 3.7 in parallel wont give you 5.5 amps, otherwise people would use one 5v battery and a million coin batteries and have a whole power grid in their portables.

And there is an edit button for a reason.

mikm240 · Post by **mikm240** » Sat Sep 03, 2005 10:18 pm

yea ur right i should use the edit button but didnt and im not goin to edited now that i made other posts

but ill take ur advice for next time

zenloc · Post by **zenloc** » Sun Sep 04, 2005 3:00 am

see i knew it that the battery wouldn't work

only if the battery has the same voltage only then can you add up the amps in parrallel right?

ahhh well i think i might get those lithium ion batterys

http://batteryspace.com/index.asp?PageA ... rodID=1328

what you put up a couple of posts ago they seem to be small and have suficent battery power i think for about 2,5 hours

that will do for me only they are bloody expensive

anyway where would the best spot be to insert the gba games?? top or bottom?

edit: he i want to ask your oppions for this.

i want to make a xbox portable these are the two things i could do which one should i do

1. make a portable like the gc one i'm making now with 5 inch screen landscape and cut the bord in half and solder all those connections.

2. or i've got a little metal case to carry things in and if i slitly modify the xbox i can get that in with a 8 inch lcd screen without the dvd drive don't need that anyway cause i have a modchip and play games from my hdd which will be in there 350 GBB to be exact

i would like to make the first one since nobody has done that yet and especcialy cut the board in half to cut the width in half very challanging indeed

anyway i would like to know what you like me to make i have enough time on my hands and enough funds to buy stuff

please post you ideas maby you have a ncer idea and i could try that

let it all go

mikm240 · Post by **mikm240** » Sun Sep 04, 2005 8:08 am

yea i think u should finish the gcp and then do the xboxp idont think anyone will beat yea to it. and the gba carts should stick out were ever u plan to put the memorey card slot it will look neater make it so the system doesnt have squares sticking out differnt sides.

p.s yea those batteries are wicked expensive put if u had two in parallel with just the gc and psone screen u could get 6 hrs that would be sweet
but u probley have to get rid of ur extra stuff to keep it slim.

zenloc · Post by **zenloc** » Tue Oct 04, 2005 6:20 am

he i have a slight problem i've been skinning down my psone screen board with cuttinh things of etc.. and now yiou know those ground points where the screen lays you have tose little brown things 4 of them one on each point and now there goine because i acedentialy took them of and threw them away now when i connect my screen i get these 3 big whites lines look like a tornado 3 of them and it won't go away i don't get it someone please help

and i also copulate up that fuse thing so i baypased it but now when i coneect the psone screen to the gamecube it won't poweer up anymore only if i give it it's own power supply??

please i must get that screen working again cause then my portable is nearly finished

zenloc · Post by **zenloc** » Wed Oct 05, 2005 1:54 pm

can't anybody help otherwise i have to but another psone screen and i don't have the money for it pls someone help

jeroen · Post by **jeroen** » Mon Oct 10, 2005 7:52 am

Uhmmm Zenloc are you Dutch i happend to see some Dutch text on your scetches. If you are i have a message for you: Dus je bent Nederlands leuk he ik ook. Was dat iets voor wiskunde ofzo.