game cube life time

Includes PS2, Xbox 1, GameCube (but not the Phantom Game Console)

Moderator: Moderators

mikm240
Posts: 100
Joined: Sun Aug 28, 2005 7:26 pm

game cube life time

Post by mikm240 »

ive been gradutally building a gcp but i would like to know if anyone could tell me how much game time i would get off of 4 lithium polymer batterys at
14.8 volts 6 amps total 3.7 1.5 amps each

i dont know what im useing for a screen i left another topic under screen hacking to decide weither i should use a portable dvd screen

but all i need to know is the game cube playing time for now

i'd apperciate it
S q u e e !
Posts: 835
Joined: Wed Feb 16, 2005 11:31 am
Location: Lost. Are you my mommy?

Post by S q u e e ! »

Could you give me a better description of the amps/volts please?
"I like my coffee like I like my women. In a plastic cup."

~Eddie Izzard
usbcd36
Posts: 1293
Joined: Sun May 15, 2005 5:04 pm
Location: Inside Samus's arm cannon [gulp]___ Gender: Male

Post by usbcd36 »

Well, Gamelver's GCp supposedly ran for "over an hour" on a bank of li-poly batteries, total was 14.8v @ 8 AH, so I'd say yours will run for about an hour.
S q u e e !
Posts: 835
Joined: Wed Feb 16, 2005 11:31 am
Location: Lost. Are you my mommy?

Post by S q u e e ! »

But, it depends on a ton of factors. How many fans you are going to use for cooling, the screen's power intake needs, among others. We need details! Give them to us!
"I like my coffee like I like my women. In a plastic cup."

~Eddie Izzard
mikm240
Posts: 100
Joined: Sun Aug 28, 2005 7:26 pm

Post by mikm240 »

for squee its like i have four lithium polymers
they each have 3.7 volts
and they each have 1500 mili amps

i plan on useing all of them in series or in parallel i forget witch one is the one i want (my electrical knowledge is a really rusty i took a long brake from this project i gata get back in tune)

but yea the one that makes them add up two 14.8 volts (think its series)

in the end they should power 14.8 volts and 6000 mili amps

but yea im going back to this project after making the case but not liking it . but now i think i have a really good idea for a case plus last time i had it all running off of a big battery that was no was good for a handheld if some one has suggestions on batterys (cheaper the better) (and long lasting hopefully) also charging batties i like to know a good set up for rechargeing any batteries the info is probley hear some where but every time i search something it gives me 50 pages of random stuff on the forum so ..
daguuy
Portablizer
Posts: 3666
Joined: Fri Apr 01, 2005 7:09 pm
Location: missoura

Post by daguuy »

series increases voltage but not mah, parallel increases mah but not voltage. i need some details about everything (screen, fans, etc) to determine battery life
ImageImage
S q u e e !
Posts: 835
Joined: Wed Feb 16, 2005 11:31 am
Location: Lost. Are you my mommy?

Post by S q u e e ! »

Image

My wiring diagram. But yeah, you can't add up both the mA and Volts with either method, so it wouldn't run for even 30 minutes with those mA.
"I like my coffee like I like my women. In a plastic cup."

~Eddie Izzard
mikm240
Posts: 100
Joined: Sun Aug 28, 2005 7:26 pm

Post by mikm240 »

ok sry i was thinking of useing heatsinks instead of fans because i was looking at gamlver pics and it looked like thats all he did (i could be wrong just goin by pics) and as for screen i have no idea im in the works(dont have one at the moment ) i was just seeing if some one could give me what it would be without the screen like just the system unit.

but plus if useing what i got for batterys will get me a hour then i would probley wana find somthing else its not worth the work for my case plan if i only get a hour so i guess ill forget about the time estimate but im open for battery ideas.
S q u e e !
Posts: 835
Joined: Wed Feb 16, 2005 11:31 am
Location: Lost. Are you my mommy?

Post by S q u e e ! »

I gave up my GCp project because of battery issues (:cry:), so I hope you have better luck than me...
"I like my coffee like I like my women. In a plastic cup."

~Eddie Izzard
mikm240
Posts: 100
Joined: Sun Aug 28, 2005 7:26 pm

Post by mikm240 »

yea i dout but thanks anyway
usbcd36
Posts: 1293
Joined: Sun May 15, 2005 5:04 pm
Location: Inside Samus's arm cannon [gulp]___ Gender: Male

Post by usbcd36 »

S q u e e ! wrote:Image

My wiring diagram. But yeah, you can't add up both the mA and Volts with either method, so it wouldn't run for even 30 minutes with those mA.
Erm, you might want to change some flaws with that diagram. The connection for ground should go to the controller ground, otherwise the system will not work when you insert a DC plug, and move the + connection to the TV power in spot, otherwise the system will automatically turn on whenever you insert a DC plug (regardless of the power switch, only after fixing the ground too) and may blow up the batteries.
mikm240
Posts: 100
Joined: Sun Aug 28, 2005 7:26 pm

Post by mikm240 »

could some one tell me if this is right i calculated the playtime of my gcp
i did : battery/ GC mili amps+ screeen mili amps = play time

with my batteries it was 6000 mili amps divided by 1800 (witch is what gamelver said the game cube takes) + 750 (witch is what is said that the psone screen takes without the led mod)

6000/

1800+750 = 2550

6000/2550 = 2.35 witch is the playing time (witch got me excited cause what i got the impression was that most a gcp has run for is just over a hour or so)

but i dont know if that would be accurate so .some one tell me who knows
bicostp
Moderator
Posts: 10491
Joined: Mon Mar 07, 2005 5:47 pm
Steam ID: bicostp
Location: Spamalot
Contact:

Post by bicostp »

No. You have the math right, but in that equation you're adding both the Mah AND the voltage. With the batteries you have, you have <b>either</b> a 3.7v 6 amp battery pack (which is less than the GCp by 2 amps), <b>or</b> a 14.8v 1500mah battery pack.

In order to have the battery you're thinking of, you need 4 sets of those batteries. each individual set would be wired in parallel, and the sets would be wired together in series.

Just use a couple R/C batteries or a portable DVD player pack like Ben used. I'm using an old laptop battery (12v 4.5 amps)

But you do have the math right:

amps/(motherboard draw + screen draw)=battery life
mikm240
Posts: 100
Joined: Sun Aug 28, 2005 7:26 pm

Post by mikm240 »

ok what ur saying is i have the math right but i need to wire a certain way

i am useing 4 batteries 3.7 volts and 1500 mli amps each

i just added there volts and amps together like u said i think ,then i did the math do u have any idea on how i should wire it the best

also about useing rc batteries what would i use
like two 7.2 volt ones (or would that be 2much power)
Turbo Tax 1.0
Portablizer Extraordinaire
Posts: 4773
Joined: Wed Mar 30, 2005 6:19 pm
Location: Delaware, no sales tax
Contact:

Post by Turbo Tax 1.0 »

ok i am using 2 3000 ma RC batteries from rad shack in mine and it works fine

if you want you can probly still buy one battery and a charger from segasonicfan for a good deal then buy the other one at radio shack


id get the 3000 ma Ni-MH ones they are the ones ive got
when life gives you lemons make flux
Image
snesp mk4
Post Reply