Snes Step By Step Guide

HotDog-Cart · Post by **HotDog-Cart** » Thu Jul 28, 2005 2:45 pm

Hey guys, Im planning on Making my Friend a SnesP its just i need some help..
I need a Step by step Guide, i dont think the one on DoomPortables will work becuase, Thats a Mini Snes on doom Portables, and i am making the SnesP out of a Regular Snes, so does anyone have a Step by Step Guide?

G-Prime · Post by **G-Prime** » Thu Jul 28, 2005 2:50 pm

Its mostly the same thing. the mini is small and uses less power. I think that the snes takes 2 different votages...while the mini only takes one...but then again I could be wrong

I say just go for it, besides what fun is making somthing if you don't break somthing. Im up to my 16th psone controller...if I only had some diazepams

HotDog-Cart · Post by **HotDog-Cart** » Thu Jul 28, 2005 2:53 pm

wow, its just im usinga freinds console and its my first job

wow that is a lot of PS1

G-Prime · Post by **G-Prime** » Thu Jul 28, 2005 2:55 pm

I could wire the controller if those leads wern't so samll (and I didn't suck do bad at soldering)I also forgot to mention that I also broke a psone screen too.

EvilnessNMyVeins · Post by **EvilnessNMyVeins** » Thu Jul 28, 2005 4:18 pm

Its pretty much exactly the same but no capacitor replacement that is required on the Mini. However you may be using the original version one which has a small seperate board(not the controller board) above the power jack and I don't know what that is for, so hope you got the single board(and controller board) one.

HotDog-Cart · Post by **HotDog-Cart** » Thu Jul 28, 2005 4:32 pm

im using this one: http://img.photobucket.com/albums/v239/Kao1/snesXX.jpg
i already know i will not be able to get passed the Nintendo Screws, so is it safe, to just saw the case off?

goodie · Post by **goodie** » Thu Jul 28, 2005 4:33 pm

EvilnessNMyVeins wrote:However you may be using the original version one which has a small seperate board(not the controller board) above the power jack and I don't know what that is for, so hope you got the single board(and controller board) one.

That extra little board is the sound circuitry.

HotDog-Cart · Post by **HotDog-Cart** » Thu Jul 28, 2005 4:36 pm

does this Snes have the 2 boards
http://img.photobucket.com/albums/v239/Kao1/snesXX.jpg

nos_slived · Post by **nos_slived** » Thu Jul 28, 2005 4:41 pm

You can't tell from that picture.

goodie · Post by **goodie** » Thu Jul 28, 2005 4:42 pm

The only way to tell is to open it.

HotDog-Cart · Post by **HotDog-Cart** » Thu Jul 28, 2005 4:54 pm

oh i thought just by looking at them you could tell
well..OMG
look what kinda of Snes is this?
http://computermuseum.50megs.com/images ... o-snes.jpg
is that some kind of OLD snes or something?
it looks nothing like the ones here in Canada

nos_slived · Post by **nos_slived** » Thu Jul 28, 2005 5:03 pm

It's the PAL version.

HotDog-Cart · Post by **HotDog-Cart** » Thu Jul 28, 2005 5:10 pm

whats PAL?

Post by **Sparkfist** » Thu Jul 28, 2005 5:20 pm

HotDog-Cart wrote:whats PAL?

PAL is a tv resolution. US, and most of North America use NTSC (I believe Japan does too) the rest of the world uses the PAL which is what that SNES model outputs. If they are capible of being modded to out put NTSC then go for it but I doubt it.

As for your little project. The SNES that uses the second board for the sound card is the v.1 and is very rare. Chances are its a v.2 and you have one board.

HotDog-Cart · Post by **HotDog-Cart** » Thu Jul 28, 2005 5:37 pm

ok thanks..Your dog is cool....is it mean?