GCp by B!00dN3$$

daguuy · Post by **daguuy** » Fri Jul 15, 2005 10:46 pm

4 inch would be good but i just finished fixing my psone screen (yay!) and it's quality is amazing

. i highly recomend one

cennar · Post by **cennar** » Fri Jul 15, 2005 11:01 pm

wonder what screen we are going to need on the revolution? like 2.5 is ok for snes and lower.. but the rev is so small i dont want to taint it with a huge screen... well when it comes out i hope i can get a hold of a 4.5 or some thing in the middle between 3 and 5 four is ok with me...

me so high!

nos_slived · Post by **nos_slived** » Fri Jul 15, 2005 11:14 pm

BloodNess, what do you have against the edit button?

EDIT: And do you really need your concept as both your avatar and your sig?

wallydawg · Post by **wallydawg** » Fri Jul 15, 2005 11:44 pm

I like the new design. Where you have the L and R buttons on the front of the portable is a fresh idea, but it would be hard using them while playing a game.

BloodNess · Post by **BloodNess** » Sat Jul 16, 2005 6:18 pm

wallydawg wrote:I like the new design. Where you have the L and R buttons on the front of the portable is a fresh idea, but it would be hard using them while playing a game.

not really, see, theyre in a slotso you can just insert your finger and press, and it'll be quite big too so it wont be uncorftable, just see my concept, theres also some "handles" so it wont get uncomrftablewhile playing,(cause with my mockup , my pinky and the one before it would get preety uncorftable)so i put those two handles there for better gripping:

[img]http://img343.imageshack.us/my.php?image=gcpsode2or.png[/img]

*o* · Post by ***o*** » Sat Jul 16, 2005 6:20 pm

holy crap on a stick!!! thats huge

BloodNess · Post by **BloodNess** » Sat Jul 16, 2005 6:27 pm

sorry...but did you see what i was xplaining, who would'nt...yeah, i do got to shrink it a bit. i'll work on that later.

BloodNess · Post by **BloodNess** » Sun Jul 17, 2005 4:57 pm

how do tactile pushbutton switches work

*o* · Post by ***o*** » Sun Jul 17, 2005 5:06 pm

what part of them?

basically there are 4 pins (usually) 2 are connnected when its up (ignore these) and 2 are connected when they are down (simple as that)

BloodNess · Post by **BloodNess** » Sun Jul 17, 2005 5:23 pm

what happened on bens site?

i don know if its the same for you but the fotn is really smallwhy?

*o* · Post by ***o*** » Sun Jul 17, 2005 5:30 pm

hold down ctrl and use your mouses scroll wheel

nos_slived · Post by **nos_slived** » Sun Jul 17, 2005 5:33 pm

If you're using Firefox, hit CTRL+0.

BloodNess · Post by **BloodNess** » Mon Jul 18, 2005 10:01 am

hey guys , quick questrion

what do i hav to do to have a built in controller,and still have 4 players support

S q u e e ! · Post by **S q u e e !** » Mon Jul 18, 2005 11:30 am

Solder the wires from the controller ports to the corresponding places on the bottom of the first player controller port, the make a switch the switches the grounds, by putting the ground from the actual port on one end of an SPDT, and the pin coming from the controller to the opposite end, and the pin in between going to ground.

EDIT: Like this:

Or get an SPDT roller switch into the controller port itself. (Don't know if that one would work, though. It might not fit properly and still be functional)

BloodNess · Post by **BloodNess** » Tue Jul 19, 2005 4:29 pm

HUH?!

_____________________________________________________________

HEY WHAT DOES THIS MEAN,IT'S ON DOOMPORTRABLES:

Composite Video, Audio:
Composite video is pretty easy. Simply connect the center of an RCA plug to pin 2, and ground the outside. Audio is pretty much the same. Use pin 1 for left audio, 7 for right, and ground the outside of the plug.

IT'S FOR A/V IN A NINTENDO CONSOLE.