Tested the SNES...sigh...the screen does not work

Post by **bicostp** » Thu Jun 09, 2005 7:47 pm

it's not broken.

Turbo Tax 1.0 · Post by **Turbo Tax 1.0** » Thu Jun 09, 2005 8:23 pm

i gotcha

shmagoogin77 · Post by **shmagoogin77** » Thu Jun 09, 2005 8:32 pm

i wanted to wink too

Turbo Tax 1.0 · Post by **Turbo Tax 1.0** » Thu Jun 09, 2005 8:33 pm

who doest wanna wink

extremesonic · Post by **extremesonic** » Wed Jun 15, 2005 10:44 am

Turbo Tax 1.0 wrote:if you still have the minijacks fust plug em in and solder to those wires it is much easier and i tried the way from the book and it is just a big mess it wouldnt even work for me

Can you show me a pic of where you wired the video/audio on the PSOne screen's minjacks?

Turbo Tax 1.0 · Post by **Turbo Tax 1.0** » Wed Jun 15, 2005 11:27 am

there ya go i just cut the other stuff off and soldered to the wire

edit : damn thats kinda big

Radon199 · Post by **Radon199** » Wed Jun 15, 2005 11:38 am

You try the +5v mod yet? The screen sometimes needs 5V to power up but the LED mod should work fine eather way.

I had no video till I tryed this.

extremesonic · Post by **extremesonic** » Wed Jun 15, 2005 4:09 pm

so what ur saying/showing turbo tax is that u plugged in the solt 2 cable, cut off all but the composite left/right audio and soldered them to the spots shown in the book on the SNES(the spot where the multi out was and the 2 spots on the IC)

Turbo Tax 1.0 · Post by **Turbo Tax 1.0** » Wed Jun 15, 2005 7:23 pm

yup the blue wire was vid and the others were audio but im to lazy to check which ones

S q u e e ! · Post by **S q u e e !** » Wed Jun 15, 2005 8:06 pm

Arggghhhhh!!! My eyes!!! THE BLURRINESS!!! Run for cover!

Turbo Tax 1.0 · Post by **Turbo Tax 1.0** » Wed Jun 15, 2005 8:16 pm

your the second person who hates my photography skillz(with a z

)

well im not a photo guy im a make stuff outta crap guy

and i love it

i also love the idea of contributing in any way to have more kickass portables out there

legoboy · Post by **legoboy** » Wed Jun 15, 2005 10:40 pm

if your photos are that out of focus try sizing it down to about 320 for the larger direction then sharpen it some. If you don't have any program to do so, try <a href="http://gimp.org">the GIMP</a>.

nos_slived · Post by **nos_slived** » Wed Jun 15, 2005 11:39 pm

<img src=http://img290.echo.cx/img290/3428/picture0448zc.jpg Width=320>

Without even having to post a new image.