Beginner Kits

Post by **gannon** » Tue May 24, 2005 9:09 am

I was thinking of putting together some beginner kits for my store later this summer. I'm looking to make them a low price, so I'd include:
Soldering Iron
Solder
Desoldering Ribbon
Multimeter
Wire Stripper
Wire
Looking like all that would sell for around $15 + shipping. I think it's a pretty good price, and I'm pretty sure that that's about it for the basics

Unidentified Assilant · Tue May 24, 2005 9:11 am

Gannon, if I can, you got my purchase.

Post by **Gamelver** » Tue May 24, 2005 11:01 am

$15?!?!? that's a REALLY good price....I might have to buy few

....

peppers · Post by **peppers** » Tue May 24, 2005 11:09 am

seens like a pretty good price although I already have all those things sept the Multimeter and wire striper so not for me

Post by **SpongeBuell** » Tue May 24, 2005 11:36 am

boy, some multimeters alone are $15

is this digital or analog?

Post by **bicostp** » Tue May 24, 2005 1:24 pm

I'm assuming these things are really cheap through Digikey?

"cuz the cheapest soldering iorn I have found so far is $10.

Maybe what you could do is sell kits for the 2600 composite mod, or maybe a "grab bag" assortment of stuff like tact switches, pots, and resistors.

soundwave · Post by **soundwave** » Tue May 24, 2005 1:27 pm

I'll buy a kit if you do this, thatd hella cheap.

Post by **gannon** » Tue May 24, 2005 1:35 pm

Digital, it has some pretty nice features too

Post by **gannon** » Tue May 24, 2005 1:37 pm

bicostp wrote:I'm assuming these things are really cheap through Digikey? "cuz the cheapest soldering iorn I have found so far is $10.

Nope, infact, digikey is fairly expensive for most of these parts. Buying in bulk is the only reason I can sell these so cheap

bicostp wrote: Maybe what you could do is sell kits for the 2600 composite mod, or maybe a "grab bag" assortment of stuff like tact switches, pots, and resistors.

hmm... maybe, but there are so many different parts it'd be kinda hard. LEDs and tact switches wouldn't be bad though.

soundwave · Post by **soundwave** » Tue May 24, 2005 1:39 pm

I still need to buy those tact switches off of you someday, Gannon.

nos_slived · Post by **nos_slived** » Tue May 24, 2005 10:30 pm

To bad it isn't auto-ranging. Unfortunately, if it was, you would have to raise the price to about $50.

cennar · Post by **cennar** » Tue May 24, 2005 11:32 pm

bicostp wrote:I'm assuming these things are really cheap through Digikey? "cuz the cheapest soldering iorn I have found so far is $10.

Maybe what you could do is sell kits for the 2600 composite mod, or maybe a "grab bag" assortment of stuff like tact switches, pots, and resistors.

i can get some ell cheapo crapos for like a buck my best souldering iron is only 12bucks

*o* · Post by ***o*** » Wed May 25, 2005 1:12 am

ill buy that!!

shmagoogin77 · Post by **shmagoogin77** » Wed May 25, 2005 4:55 am

gannon wrote:I was thinking of putting together some beginner kits for my store later this summer. I'm looking to make them a low price, so I'd include:
Soldering Iron
Solder
Desoldering Ribbon
Multimeter
Wire Stripper
Wire
Looking like all that would sell for around $15 + shipping. I think it's a pretty good price, and I'm pretty sure that that's about it for the basics

whats desoldering ribbon?

*o* · Post by ***o*** » Wed May 25, 2005 5:24 am

i guess he means desoldering braid

benheck.com Forums

Beginner Kits

Beginner Kits

Re: Beginner Kits