ZN-40 N64p Worklog! Snowpenguin's first portable! With pics

[snowpenguin]

Time to get going on my worklog. I've been gathering parts for a little while, so far I have:

ZN-40
Back case (polycase)
Superpad controller
PS2 joystick
RB-Li 26 7.4v 4000 mAh battery- please help! http://forums.benheck.com/viewtopic.php?f=5&t=31899
Fried PSone screen
Buttons
N64(in about 3 weeks... at my cabin)
Fans
PTH08000 regulator

I bought a PSone screen from OMGitsthebishop, then fried it. I'll have to get another one.
I built the PTH08000 regulator for 3.27v, and that works.
I tried using Sintra thermoform plastic to mold a cart slot cover, but the shape of the cart I was molding to got in the way. I filled it with spackle and sanded it down to make it uniform. Will try remold soon.
Today I drilled the holes for the buttons and joystick. I messed up the c pad, put them too close together. If the buttons don't fit I'll have to use the gamecube C joystick in its cover as shown.
Will update when I progress more.

Images:
http://tinypic.com/view.php?pic=24x2q8w&s=5" onclick="window.open(this.href);return false;
Those are the wrong buttons, but whatever.


http://tinypic.com/view.php?pic=j0zhol&s=5" onclick="window.open(this.href);return false;
This has the C stick and its cover-to-be-cut on. BLURRY!


http://tinypic.com/view.php?pic=2cprcb7&s=5" onclick="window.open(this.href);return false;
Blank top cover.

Could not figure out how to post images on here... Didn't work. Oh well.

Thanks for stopping by!

[stuntpenguin007]

look for the direct link on the page ending with .jpg and put it in the image brackets like so but withoiut the -

[img-]i39.tinypic.com/2cprcb7.jpg[-/img]


I like the layout of your portable.

[snowpenguin]

Yeah that's what I tried. Didn't work. For future reference, my layout is eerily similar to Shockslayer tenth portable, the commision.