WIP: N64 portable

Includes but not limited to: SNES, Genesis, Sega CD, PlayStation 1, Nintendo 64, Dreamcast, Game Gear and I guess the Virtual Boy.

Moderator: Moderators

Post Reply
mikeyg
Posts: 427
Joined: Tue Jan 27, 2009 2:40 pm
PSN Username: mikeyg95
Location: Ghetto Jersey
Contact:

Re: WIP: N64 portable

Post by mikeyg »

Basement_Modder wrote:
mikeyg wrote:
Basement_Modder wrote:
mikeyg wrote:I'm buying wire tomorrow.
Triple fail!!!!!!!!!!!
What? :|
My apologies if you took offense. I said that because you didn't have wire yet on the 6th page. All kidding aside, hope you make some good progress!
none taken. I actually lost my wire. I found it though. I might not use that,though. I'm getting terminal blocks, hopefully.
mikeyg
Posts: 427
Joined: Tue Jan 27, 2009 2:40 pm
PSN Username: mikeyg95
Location: Ghetto Jersey
Contact:

Re: WIP: N64 portable

Post by mikeyg »

I have been sick, but slowly working on it. No pictures, as of yet. Just rewiring the cartridge slot. I was supposed to get a dremel from a member here, but my paypal didn't work. :(
My dad might get me one for a graduation present. I hope it goes well.


Also, 200th post. :)
Basement_Modder
Portablizer
Posts: 962
Joined: Sun Aug 24, 2008 7:16 am
Location: Next door to my neighbor
Contact:

Re: WIP: N64 portable

Post by Basement_Modder »

mikeyg wrote:I have been sick, but slowly working on it. No pictures, as of yet. Just rewiring the cartridge slot. I was supposed to get a dremel from a member here, but my paypal didn't work. :(
My dad might get me one for a graduation present. I hope it goes well.


Also, 200th post. :)
Sorry to hear you were sick, must suck. Good, you got the cart slot wired. The worst is behind you, now.
Cheers,
Basement_Modder
_________________
mikeyg
Posts: 427
Joined: Tue Jan 27, 2009 2:40 pm
PSN Username: mikeyg95
Location: Ghetto Jersey
Contact:

Re: WIP: N64 portable

Post by mikeyg »

Basement_Modder wrote:
mikeyg wrote:I have been sick, but slowly working on it. No pictures, as of yet. Just rewiring the cartridge slot. I was supposed to get a dremel from a member here, but my paypal didn't work. :(
My dad might get me one for a graduation present. I hope it goes well.


Also, 200th post. :)
Sorry to hear you were sick, must suck. Good, you got the cart slot wired. The worst is behind you, now.
Eh, I'm fine. Yeah, it was pretty annoying. Thanks for the encouragement. :D
mikeyg
Posts: 427
Joined: Tue Jan 27, 2009 2:40 pm
PSN Username: mikeyg95
Location: Ghetto Jersey
Contact:

Re: WIP: N64 portable

Post by mikeyg »

Progress Bump!

I GOT BATTERIES, SCREEN, AND AN N64. I'M ALL SET. ;)

Enough yelling. Guys, does this battery look ok?
http://cgi.ebay.com.au/ws/eBayISAPI.dll ... AQ:AU:1123" onclick="window.open(this.href);return false;

Brand:R&F
Model:CANON BP-930 4000mAh
Battery Type: Li-ion
Replacement for CANON original Li-Ion Battery (100% Compatible)
Capacity: 4000mAh
Voltage: 7.4V
Cell from Japan
Build in microchip prevent overcharge
New Genuine
Quantity: I have two of these.
mikeyg
Posts: 427
Joined: Tue Jan 27, 2009 2:40 pm
PSN Username: mikeyg95
Location: Ghetto Jersey
Contact:

Re: WIP: N64 portable

Post by mikeyg »

?
palmertech
Senior Member
Posts: 3225
Joined: Sat Feb 02, 2008 1:40 am
Location: California, land of the homeless and hippies

Re: WIP: N64 portable

Post by palmertech »

You will need a charger. ;)
Image

Excellent
mikeyg
Posts: 427
Joined: Tue Jan 27, 2009 2:40 pm
PSN Username: mikeyg95
Location: Ghetto Jersey
Contact:

Re: WIP: N64 portable

Post by mikeyg »

palmertech wrote:You will need a charger. ;)
That's not a problem, I'll find one, after I get the batteries. But in Parallel how long will these last?
megabite
Posts: 37
Joined: Thu Aug 28, 2008 4:25 pm

Re: WIP: N64 portable

Post by megabite »

Depending on the game, the pack you use, the revision, the battery wear, etc... I would wager at least 5-6 hours.
I bring justice to its avoiders, and pain to its resistors.
mikeyg
Posts: 427
Joined: Tue Jan 27, 2009 2:40 pm
PSN Username: mikeyg95
Location: Ghetto Jersey
Contact:

Re: WIP: N64 portable

Post by mikeyg »

megabite wrote:Depending on the game, the pack you use, the revision, the battery wear, etc... I would wager at least 5-6 hours.
my board says 1996 under the cartridge slot.Right above it it says NUS-CPU-03. Don't know if that helps.
I'm just using the jumper pack, I don't know how to find revisions....
Baterries say they're new.
marshallh
Moderator
Posts: 2987
Joined: Sat Sep 10, 2005 2:17 pm
360 GamerTag: marshallh
Location: here and there
Contact:

Re: WIP: N64 portable

Post by marshallh »

NUS-CPU-03 is your revision. Revision 03 is US launch revision. Overclocks very poorly, wastes more heat and power than later revisions, and is pretty much indestructible.
Image
mikeyg
Posts: 427
Joined: Tue Jan 27, 2009 2:40 pm
PSN Username: mikeyg95
Location: Ghetto Jersey
Contact:

Re: WIP: N64 portable

Post by mikeyg »

marshallh wrote:NUS-CPU-03 is your revision. Revision 03 is US launch revision. Overclocks very poorly, wastes more heat and power than later revisions, and is pretty much indestructible.
Cool. It is pretty indestructible, I've thrown it around quite a bit. I didn't want to overclock anyway. :(
I'm still in shock, how small this board is.... I mean just wow!
roxasnobody
Posts: 140
Joined: Fri Nov 14, 2008 12:01 am

Re: THE MGSAN64P!

Post by roxasnobody »

OhSnap! wrote:i myself am 14 years old and would be considered at least moderately intelligent and i have had some experience with electronics and engineering when i built my mame arcade machine last year. so i was making more of a retarded generalization that younger people are "stupider".
it wasn't like he was saying he was 11 to show off that he was advanced mentally for his age, he was just saying that a monkey or equivalent (the average 11 year old) probably could use a pen to unscrew it.
true im 14 my self and younger generations seem a lot more stupid than i thought (my school are filled with them)
Image
mikeyg
Posts: 427
Joined: Tue Jan 27, 2009 2:40 pm
PSN Username: mikeyg95
Location: Ghetto Jersey
Contact:

Re: THE MGSAN64P!

Post by mikeyg »

roxasnobody wrote:
OhSnap! wrote:i myself am 14 years old and would be considered at least moderately intelligent and i have had some experience with electronics and engineering when i built my mame arcade machine last year. so i was making more of a retarded generalization that younger people are "stupider".
it wasn't like he was saying he was 11 to show off that he was advanced mentally for his age, he was just saying that a monkey or equivalent (the average 11 year old) probably could use a pen to unscrew it.
true im 14 my self and younger generations seem a lot more stupid than i thought (my school are filled with them)
Fail.
Again, when people try to look smart, they look stupid..
Now stop, filling my thread with this crap. This was already settled, no need to bring it back up.
roxasnobody
Posts: 140
Joined: Fri Nov 14, 2008 12:01 am

Re: THE MGSAN64P!

Post by roxasnobody »

mikeyg wrote:
roxasnobody wrote:
OhSnap! wrote:i myself am 14 years old and would be considered at least moderately intelligent and i have had some experience with electronics and engineering when i built my mame arcade machine last year. so i was making more of a retarded generalization that younger people are "stupider".
it wasn't like he was saying he was 11 to show off that he was advanced mentally for his age, he was just saying that a monkey or equivalent (the average 11 year old) probably could use a pen to unscrew it.
true im 14 my self and younger generations seem a lot more stupid than i thought (my school are filled with them)
Fail.
Again, when people try to look smart, they look stupid..
Now stop, filling my thread with this crap. This was already settled, no need to bring it back up.
im not trying to look smart,Nor am i stupid.
and why are you so angry ? i didn't swear at you .
Image
Post Reply