Xbox ftp Help Please

Includes PS2, Xbox 1, GameCube (but not the Phantom Game Console)

Moderator: Moderators

Post Reply
JohnathanMonkey
Posts: 4
Joined: Thu May 14, 2009 7:31 pm

Xbox ftp Help Please

Post by JohnathanMonkey »

I am having a very strange problem. I am trying to ftp files from my computer to my xbox. I am using a crossover cable. My PC ip is 192.168.2.1 My xbox ip is 192.168.2.9. I am using unleashx 3.8 dashboard. I am using/have used filexilla, smartftp, and flash fxp. I prefer flashfxp.

My problem is I start flash fxp it connects to my xbox just fine. I can transfer anywhere from 15kb - 30mb (random time and data) and it just stops (not freezes). my transfer from pc to xbox mb/per sec starts dropping till it hit 0 kbps. I disconnect from flash fxp then reconnect and I can transfer a few files and same thing.

If anybody has any sugestions please tell me.
Thank you very much
Johnathan
Tromoly4130
Posts: 85
Joined: Tue Aug 16, 2005 2:27 pm
Location: College

Re: Xbox ftp Help Please

Post by Tromoly4130 »

Check your Gateway settings, on my xBox I have it set so the PC is the gateway, and on my PC I have it set to the xBox is the gateway.
There's No Place Like 127.0.0.1.
Harlequin
Posts: 182
Joined: Fri Apr 25, 2008 1:20 am

Re: Xbox ftp Help Please

Post by Harlequin »

Try setting your settings to static IP instad of Dynamic. also make sure that USE PASSIVE mode is turned off in the options of Flash FXP -

Options -> preferences -> Proxy -> 2nd half of screen is USE PASSIVE.. uncheck this piece of garbage..
JohnathanMonkey
Posts: 4
Joined: Thu May 14, 2009 7:31 pm

Re: Xbox ftp Help Please

Post by JohnathanMonkey »

Turning off passive worked!! Thank you so much!!
JohnathanMonkey
Posts: 4
Joined: Thu May 14, 2009 7:31 pm

Re: Xbox ftp Help Please

Post by JohnathanMonkey »

Thabk you guys for the help. Passive mode worked for 1 file then back to screwing up. I replaced my ethernet card and now I'm having no trouble. Thanks again for the help!
Post Reply