I has another question...

Includes Atari 2600, Nintendo 8-bit, Sega Master System, MSX and more!

Moderator: Moderators

n00balicious
Posts: 13
Joined: Sat Mar 28, 2009 4:40 pm

I has another question...

Post by n00balicious »

Hey guys, its the total noob with no skills again. I have another question.
I thought it'd be kinda cool to make a glowing n64 controller, so i'm gonna get an atomic purple controller, unless i can find a clear shell, which seems unlikely unless someone makes them aftermarket. hence the questions:

anyone know where i can get a clear n64 housing shell that fits an original controller, not a remake aftermarket controller?

What size LEDs would i buy?

how would i wire them in? i told you i have no skills!

oh, and your opinion: what color should i get?

thanks!

i would want them on all the time when it was plugged in.
Last edited by n00balicious on Mon Mar 30, 2009 11:30 am, edited 1 time in total.
Tibia
Posts: 1319
Joined: Thu Feb 28, 2008 2:02 pm
PSN Username: Tibia1013
Steam ID: Mulder101361
Location: Istanbul, not Constantinople
Contact:

Re: I has another question...

Post by Tibia »

Please knock it off with the lolcatz grammar. It's irritating.

I'd use 3mm LEDs myself.

Do you want them always on, or do you want them to light up when you press a button? What you want determines where they'd be wired to.

The only clear controller I've seen is the transparent purple one.

What colors do you like? I'm not the one making it, my opinion shouldn't matter.
This post brought to you by David Duchovny's glorious nipples.
n00balicious
Posts: 13
Joined: Sat Mar 28, 2009 4:40 pm

Re: I has another question...

Post by n00balicious »

i would want them on all the time when it was plugged in.
nevermind1534
Senior Member
Posts: 1977
Joined: Fri Feb 06, 2009 1:36 pm
Steam ID: nevermind1534
Location: Detroit, MI
Contact:

Re: I has another question...

Post by nevermind1534 »

I could sell you some 5mm LEDs with resistors for a good price.
Kyo wrote:"does anyone here know how to fly a plane?"

"STAND BACK EVERYBODY, I HAVE A FAKE ID"
palmertech
Senior Member
Posts: 3225
Joined: Sat Feb 02, 2008 1:40 am
Location: California, land of the homeless and hippies

Re: I has another question...

Post by palmertech »

There were clear N64 controllers made towards the ends of its lifetime, along with clear orange and blue. Good luck finding them, though, nobody cared enough by then to buy them. :(

They had these awesome commercials with different colored sumo wrestlers holding N64s in various colors all charging at each other on a battlefield. Like, hundreds and hundreds of them. :lol:

I still remember that commercial, like 10 years later. :P
Image

Excellent
nevermind1534
Senior Member
Posts: 1977
Joined: Fri Feb 06, 2009 1:36 pm
Steam ID: nevermind1534
Location: Detroit, MI
Contact:

Re: I has another question...

Post by nevermind1534 »

http://search.ebay.com/search/search.dl ... category0=

There's a few official ones there. I think I actually have a transparent blue controller.
Kyo wrote:"does anyone here know how to fly a plane?"

"STAND BACK EVERYBODY, I HAVE A FAKE ID"
Rekarp
Portablizer Extraordinaire
Posts: 2163
Joined: Thu Dec 28, 2006 1:52 am
PSN Username: Lnghrn_
Steam ID: rekarp
Location: Austin, Tx
Contact:

Re: I has another question...

Post by Rekarp »

nevermind1534 wrote:I could sell you some 5mm LEDs with resistors for a great price.
fixed
The wood master

Image

"I was under the impression Mac owners don't actually USE their machines, they just parade them around trying to evangelize the masses."
n00balicious
Posts: 13
Joined: Sat Mar 28, 2009 4:40 pm

Re: I has another question...

Post by n00balicious »

but how would i wire them in?
Tibia
Posts: 1319
Joined: Thu Feb 28, 2008 2:02 pm
PSN Username: Tibia1013
Steam ID: Mulder101361
Location: Istanbul, not Constantinople
Contact:

Re: I has another question...

Post by Tibia »

I'd go right off the controller cord, myself. Use the 3.3V and Ground lines.

http://forums.benheck.com/viewtopic.php ... 92#p159392
This post brought to you by David Duchovny's glorious nipples.
nevermind1534
Senior Member
Posts: 1977
Joined: Fri Feb 06, 2009 1:36 pm
Steam ID: nevermind1534
Location: Detroit, MI
Contact:

Re: I has another question...

Post by nevermind1534 »

The 3.3V LEDs that I have only come with resistors for 5V and 12V. The white LEDs (17000mcd) use 47 OHM resistors for 5V. So what would you guys say they would need for 3.3V?
Kyo wrote:"does anyone here know how to fly a plane?"

"STAND BACK EVERYBODY, I HAVE A FAKE ID"
Tibia
Posts: 1319
Joined: Thu Feb 28, 2008 2:02 pm
PSN Username: Tibia1013
Steam ID: Mulder101361
Location: Istanbul, not Constantinople
Contact:

Re: I has another question...

Post by Tibia »

They're 3.3V LEDs. It's a 3.3V line. They won't need resistors.
This post brought to you by David Duchovny's glorious nipples.
nevermind1534
Senior Member
Posts: 1977
Joined: Fri Feb 06, 2009 1:36 pm
Steam ID: nevermind1534
Location: Detroit, MI
Contact:

Re: I has another question...

Post by nevermind1534 »

Tibia wrote:They're 3.3V LEDs. It's a 3.3V line. They won't need resistors.
Good. I wasn't sure if they would. n00balicious, if you're interested, shoot me over a pm.
Kyo wrote:"does anyone here know how to fly a plane?"

"STAND BACK EVERYBODY, I HAVE A FAKE ID"
eurddrue
Senior Member
Posts: 2367
Joined: Fri Jul 18, 2008 1:26 pm
Location: I am so caught up in real life I have to be done for a while. I'll still check in but dontexpectmuch

Re: I has another question...

Post by eurddrue »

Tibia wrote:They're 3.3V LEDs. It's a 3.3V line. They won't need resistors.
you always need a resistor on an led. ALWAYS.

does this guy even know what a soldering iron is? Maybe that's what he means when he says "but how would I put them in?"
Banned indefinitely if you desperately need to contact me STOPPHONESPAMPLOX Please dont be a dick and call for something random like "HEY YURDRUE DOO U HAZ SPAM?"
wallydawg wrote:
chainfire95 wrote:220V I believe
I think we should check to see if you can withstand 220 volts
Tibia
Posts: 1319
Joined: Thu Feb 28, 2008 2:02 pm
PSN Username: Tibia1013
Steam ID: Mulder101361
Location: Istanbul, not Constantinople
Contact:

Re: I has another question...

Post by Tibia »

eurddrue wrote: you always need a resistor on an led. ALWAYS.

Umm, no. The resistor just knocks the voltage down to a safe level for the LED. If the voltage is already in the proper range, you don't need an LED.
This post brought to you by David Duchovny's glorious nipples.
palmertech
Senior Member
Posts: 3225
Joined: Sat Feb 02, 2008 1:40 am
Location: California, land of the homeless and hippies

Re: I has another question...

Post by palmertech »

I thought the problem was that you also need to limit current, as well?
Image

Excellent
Post Reply