evilmrdoo wrote:I just got mine up and running. Note to any other Newbies. Don't try to wire to the controller that came with the system (i tried that so I would still have a controller if it didn't work out) Wire directly to the main board .
You would have needed to cut the trace for the latch on the stock controller. Otherwise you will be latching from 2 controllers, and you'll get a 1 on all buttons since they are active low. Basically, not pushing a button sends a 1, and pushing it sends a 0. BUT if one IC is sending a 0 and the other sends a 1, it is received as a 1.
Just found a place in town that still sells superjoys ($25 a pop, but its local and easy to get to...) Anyway just got the pinouts for it, they were a little jacked up (okay, a lot but who cares.
so here are my pinouts for the 76000 in 1, I couldn't find them elsewhere hope this helps someone ( I'm also posting these b/c when I lost my orignal superjoy pinouts I knew I could find them here, so if nothing else posting these here gives me a backup copy)
these are with the cartidge slot down from left to right 1-12
(new)(controller)
12-white (+5v)
4-yellow from controller
2-red from controller
5-orange from controlelr (shared by 2nd controller)
9-ground (brown)
11-video
10-audio
hope this helps (also found out straight 12v can fry these, be careful)
yeah, I just finished up deleting a batch of them too.
Almost as bad as that one spammer who posted around 100 different asian porn links around the site....I shoulda saved them : '([size=0]j/k[/size]
