Is my N64 ruined? And more.

Includes but not limited to: SNES, Genesis, Sega CD, PlayStation 1, Nintendo 64, Dreamcast, Game Gear and I guess the Virtual Boy.

Moderator: Moderators

Post Reply
Nurd!
Posts: 64
Joined: Wed Jul 23, 2008 7:26 pm

Is my N64 ruined? And more.

Post by Nurd! »

I have several N64s, and one of them is taken apart.

While playing a game, I thought that it would be a good Idea to touch a piece of metal to one of the chips, making two of the pins touch.

Now neither of my N64's are working.

I dunno what is wrong, if It killed the expansion pak or the power thing, I dunno how it would have, but is it possible for either of these things to have happened from just touching two pins together?

How do I power a Portable?
How do I make a case?- I'm 14 and have to access to any type of cutting machine of higher quality than stuff in my garage.
Nurd!
Posts: 64
Joined: Wed Jul 23, 2008 7:26 pm

Post by Nurd! »

Bumping because of adding stuff.
ShockSlayer
Niblet 64
Posts: 5059
Joined: Thu Jun 29, 2006 12:47 pm
Location: In my inbox.

Post by ShockSlayer »

Nurd! wrote:While playing a game, I thought that it would be a good Idea to touch a piece of metal to one of the chips, making two of the pins touch.While playing a game, I thought that it would be a good Idea to touch a piece of metal to one of the chips, making two of the pins touch.
Image

Ok, never do that again.

Anyways, if the dont turn on(no red light) after using multiple power adapters, and checking all your connections, then I'd say fried. Also, never run your n64 without proper heatsinking. The 3 little things that come with it will kill it if you dont leave the heatsink as a whole. So replace that with something from an old computer, or be a rich guy or sumthin and buy some off internet.

To make a case, check the case construction forum. I beleive trton has a guide there.

TO power your n64p, use harshboy's diagram in the sticky, the correct links are on the last page.

Your welcome. :P

SS
http://twitter.com/ShockSlayer" onclick="window.open(this.href);return false;
Nurd!
Posts: 64
Joined: Wed Jul 23, 2008 7:26 pm

Post by Nurd! »

Thanks :D

Touching stuff together has never been bad to me on NES, Famicom, SNES, or any Gameboys. :(
bacteria
Portablizer Extraordinaire
Posts: 3984
Joined: Fri Apr 20, 2007 12:14 am
Location: Hampshire, UK
Contact:

Post by bacteria »

That's because the N64 uses two power inputs not one. If you touch a line expecting 3v with a fair bit over that you will fry your system!

Have a look on my sig too for guides and diagrams for the N64 system.
Image
Aguiluz
Posts: 1141
Joined: Tue Nov 20, 2007 7:58 pm
Location: Ontario, Canada
Contact:

Re: Is my N64 ruined? And more.

Post by Aguiluz »

Nurd! wrote:I have several N64s, and one of them is taken apart.
.......
Now neither of my N64's are working.
Wait, all of your N64s are not working?
Image
Nurd!
Posts: 64
Joined: Wed Jul 23, 2008 7:26 pm

Post by Nurd! »

Hmm.

I guess I didn't say that correctly.


I have three N64's.

One is taken apart, and I use one of them.


When I touched those pins together (on the taken apart one), it either ruined the power thing, the expansion thing, or both, because I plugged them into my N64 that I use, and It didn't turn on,
timmeh87
Senior Member
Posts: 3047
Joined: Mon Nov 14, 2005 10:19 pm
Location: Ontario, Canada

Post by timmeh87 »

5 bucks says it was the power brick.
Image

"Linux is only free if your time is worthless"
Nurd!
Posts: 64
Joined: Wed Jul 23, 2008 7:26 pm

Post by Nurd! »

Yeah, It was.

I have an extra, though :D
Post Reply