connecting screen to SNES

nuky nuclear · Post by **nuky nuclear** » Wed Jul 02, 2008 2:07 pm

Ok so i got a zenith screen i am wondering how i would wire that to my SNES. i noticed that the color wires on the zenith screen are red, white, yellow, and black. I take it that red, white, and yellow are the video and audio wires and that the black might be another power wire. in all there are 4 wires. so how do i connect those 4 wires to my SNES? if anyone knows where i can find a diagram showing how to do this i would like to see it. oh and its a mini snes.

Valium · Post by **Valium** » Wed Jul 02, 2008 3:18 pm

The black wire is ground. You solder the video from the Zenith to the Video pin on the Snes, likewise for both audios and ground.

I'll find the Snes' pinout for you.

edit: http://www.extremetech.com/article2/0,2 ... 803,00.asp

nuky nuclear · Post by **nuky nuclear** » Wed Jul 02, 2008 3:26 pm

ok thank you, where to i solder the black ground wire then? also do i have to put any wires on the left and right audios?

Valium · Post by **Valium** » Wed Jul 02, 2008 3:38 pm

Wonder why it's not there.. It's on the top row of pins, 4th from the right (the desoldered a/v plug).

nuky nuclear · Post by **nuky nuclear** » Wed Jul 02, 2008 3:58 pm

ok i think i see which one. also i was wondering is it possible to use the video/audio port that is currently on the snes by having wires run to it so i am able to hook the portable up to a tv?

Valium · Post by **Valium** » Wed Jul 02, 2008 4:38 pm

nuky nuclear · Post by **nuky nuclear** » Wed Jul 02, 2008 5:13 pm

ok thanks for all the help

just making sure i got the right spot for the ground is this the right spot?