So my arcade monitor is having issues. While this is a problem with my Dig-Dug machine, it's more of a general CRT's issue. I think the caps in the PSU and/or monitor need to be replaced, as...
-The degaussing coil does not work
-Odd lines on screen
-Video does not fill the screen (adjustments do not fix it)
-Cycles between way-too-bright and way-too-dark
-Odd lines and wiggles on the screen every second or so
-Inputs occasionally drop out
Video with the problems: http://www.youtube.com/watch?v=KMuU8D9wot8
CRT caps
Moderator: Moderators
-
LoyalistRevolt
- Posts: 515
- Joined: Sat Aug 18, 2007 7:37 pm
- Location: SugarLand, TexMex
-
Rekarp
- Portablizer Extraordinaire
- Posts: 2163
- Joined: Thu Dec 28, 2006 1:52 am
- PSN Username: Lnghrn_
- Steam ID: rekarp
- Location: Austin, Tx
- Contact:
He cant just get a new one. They don't make erm anymore. Looks like the tube is ok. Just a matter of finding the right parts.LoyalistRevolt wrote:Wrong section and your monitor probably crapped out...Get a new one.
Theres a forum at Atariage.com called Arcade Coin-ops. You should post your question there as they can give you better advice on this problem.
-
LoyalistRevolt
- Posts: 515
- Joined: Sat Aug 18, 2007 7:37 pm
- Location: SugarLand, TexMex
Really?! They don't make CRT's anymore...Rekarp wrote:He cant just get a new one. They don't make erm anymore. Looks like the tube is ok. Just a matter of finding the right parts.LoyalistRevolt wrote:Wrong section and your monitor probably crapped out...Get a new one.
Theres a forum at Atariage.com called Arcade Coin-ops. You should post your question there as they can give you better advice on this problem.
"All wars are civil wars, because all men are brothers."
-
Rekarp
- Portablizer Extraordinaire
- Posts: 2163
- Joined: Thu Dec 28, 2006 1:52 am
- PSN Username: Lnghrn_
- Steam ID: rekarp
- Location: Austin, Tx
- Contact:
Not Dig Dug screensLoyalistRevolt wrote:Really?! They don't make CRT's anymore...Rekarp wrote:He cant just get a new one. They don't make erm anymore. Looks like the tube is ok. Just a matter of finding the right parts.LoyalistRevolt wrote:Wrong section and your monitor probably crapped out...Get a new one.
Theres a forum at Atariage.com called Arcade Coin-ops. You should post your question there as they can give you better advice on this problem.
I could buy a good Wells-Gardener, but I'm not a person with money. The tube is fine, and it has once desplayed a perfect image (the color issues were temporarily solved with a guitar amp speaker held up to the side upon turning it on to simulate a degausing coil), but the fact that the marquee does not light and the input is intermittent implies it is a power issue.
...
