Prefered screen/tv

If you're making a portable you probably need something to watch it on. (Unless you want to guess what's happening in the game, but I wouldn't advise that) Anyway, this forum is your "Hacking a pocket TV/screen" one-stop solution. Share your experiences and knowledge here.

Moderator: Moderators

Sparkfist
Forum Administrator
Posts: 6754
Joined: Tue Apr 20, 2004 7:12 am
Location: Michigan

Prefered screen/tv

Post by Sparkfist »

I'm looking to make a portable and as the screen's on eof the key parts I'd like to ask what type. For instance should I save up and buy an LCD made for the PSOne/PS2/Xbox/GC or buy a portable tv and butcher it.

Please if/when you make a suggestion be specifice to type and (opitional) make a comment to why you like it.

Thank you.

Sparkfist
MR.MOD
Posts: 219
Joined: Mon Apr 05, 2004 6:19 am
Location: Minnesota

Post by MR.MOD »

I would buy the official sony ps1 screen. I have one and it's the best screen that I have. You can even get them cheaper than most portable tvs. http://search.ebay.com/search/search.dl ... one+screen

The best place to get them cheap probably would be ebay.
Image
Sparkfist
Forum Administrator
Posts: 6754
Joined: Tue Apr 20, 2004 7:12 am
Location: Michigan

Post by Sparkfist »

Ok thanks Mr. Mod

All I have to do is get a PayPal account and sign up to Ebay.... Why do I feel like I'm behind the curve for some reason.
segasonicfan
Moderator
Posts: 516
Joined: Fri Jul 23, 2004 3:57 am

Post by segasonicfan »

I prefer the new RCA 16-3065 simply because it isn't one long connected PCB but 2, they connect through 16 pins. This enables me to stack he two PCBs to save room. It's a very nice option. It's also a crystal clear 3" display and only uses 550mah

-Segasonicfan
gannon
Moderator
Posts: 6974
Joined: Sun Apr 04, 2004 4:48 pm
Location: Near that one big lake
Contact:

Post by gannon »

sounds like a nice tv segasonicfan, about how big is each pcb?
Gamelver
Moderator
Posts: 3352
Joined: Sun Apr 04, 2004 9:03 pm
Location: in my basement, to forever work on portables ;)

Post by Gamelver »

That's the tv I was going to use before I messed it up. From what I can remeber, each PCB is about 4 inches or so (I'm probably wrong so don't get mad if I am). It's really nice and compact. Too bad I broke it......
Without games my life would have no meaning.
Well, I guess it would, but it would be a lot less fun!!!!!!!

Image
segasonicfan
Moderator
Posts: 516
Joined: Fri Jul 23, 2004 3:57 am

Post by segasonicfan »

yes its about 4 inches....and how did you break it? I have broken them before but I know a trick to fixing them :D

Soler a wire from the + input on the buttom of the tuner/volume dial board and attatch it to pin 7 of that board (looking the speaker side up and counting from the left side)


hope that helps!

_Segasonicfan
gannon
Moderator
Posts: 6974
Joined: Sun Apr 04, 2004 4:48 pm
Location: Near that one big lake
Contact:

Post by gannon »

I want to make an atari portable sometime, but I'm going to build my own circuit board. I want to find a small lcd that will work good with it.
Gamelver
Moderator
Posts: 3352
Joined: Sun Apr 04, 2004 9:03 pm
Location: in my basement, to forever work on portables ;)

Post by Gamelver »

I think it broke because too much voltage went in. I was using a car adapter to convert 12 volts into the 6v it needs and I think the car adapter got screwed up so that it didn;t convert the voltage anymore. When I get home I'll try what you said.

I hope it works!
Without games my life would have no meaning.
Well, I guess it would, but it would be a lot less fun!!!!!!!

Image
SpongeBuell
Senior Member
Posts: 5190
Joined: Wed Apr 07, 2004 10:52 am
Location: Colorado
Contact:

Post by SpongeBuell »

sounds like you have a blown fuse. Wouldn't surprise me if it works.
Life of Brian wrote:
RYW wrote:RYW:

Rare
Yellow
Weasel
I'll be honest with you - I would have never guessed that.
segasonicfan
Moderator
Posts: 516
Joined: Fri Jul 23, 2004 3:57 am

Post by segasonicfan »

yeah, it's a simple fuse that blows. I have blown 2 TVs and fixed them both this way. One TV broke because I switched the polarity accidentally, and the other broke because I inserted all the pins one over (so one pin was sticking out and the rest were all mis-alligned). With this simple connection I repaired both of them :) Good lucK!

-Segasonicfan
Sparkfist
Forum Administrator
Posts: 6754
Joined: Tue Apr 20, 2004 7:12 am
Location: Michigan

Post by Sparkfist »

OK I have a Paypal and ebay account, from everyone (if possible without crashing the server) tell me if a portable tv or PSOne screen would be better. I'm going to finish up my PSp first then move on to my N64, then the Dreamcast. I know what I'm doing for the last two I need one for the PSOne.
vskid wrote:Nerd = likes school, does all their homework, dies if they don't get 100% on every assignment
Geek = likes technology, dies if the power goes out and his UPS dies too

I am a geek.
JackFrost22
Sir Posts-alot
Posts: 4186
Joined: Fri Jun 04, 2004 4:10 pm

Post by JackFrost22 »

A PSOne screen is best I got a broken one for $1 :D but $9 :( shipping on eBay all that was broken was that the ribbon cable was a little loose so I fixed it :P .
gannon
Moderator
Posts: 6974
Joined: Sun Apr 04, 2004 4:48 pm
Location: Near that one big lake
Contact:

Post by gannon »

lucky you!! I'd say a psone screen, even though they're kinda hard to do the led mod with, maybe I just need to use smaller wire :)
segasonicfan
Moderator
Posts: 516
Joined: Fri Jul 23, 2004 3:57 am

Post by segasonicfan »

The PSOne screen is the best :) i wonder how well the LED mod works though...I would really like to cut the power usage on my system but I don't want to forsake any quality. I wish Ben or someone would post before and after pictures of the mod... :/

-Segasonicfan
Post Reply