11.1V or 14.8V for Gamecube?

Includes PS2, Xbox 1, GameCube (but not the Phantom Game Console)

Moderator: Moderators

c_mon
Portablizer Extraordinaire
Posts: 464
Joined: Fri Jan 05, 2007 11:45 am
Location: Turkey

11.1V or 14.8V for Gamecube?

Post by c_mon »

Is a battery of 11.1V enough rather than approximately 12V? If so, is this good?

http://www.batteryspace.com/index.asp?P ... rodID=2940


If it's not enough, is 14.8V too much?

http://www.batteryspace.com/index.asp?P ... rodID=2984


In short I'm asking if it should approximately be 12V or not?
Thanks to all repliers.
ShockSlayer
Niblet 64
Posts: 5059
Joined: Thu Jun 29, 2006 12:47 pm
Location: In my inbox.

Post by ShockSlayer »

14.8 with a stepdown to twelvw = yes.

11.1. I wouldn't take my chances

SS
http://twitter.com/ShockSlayer" onclick="window.open(this.href);return false;
c_mon
Portablizer Extraordinaire
Posts: 464
Joined: Fri Jan 05, 2007 11:45 am
Location: Turkey

Post by c_mon »

How should a stepdown to 12 be made? Are there any instructions?
ShockSlayer
Niblet 64
Posts: 5059
Joined: Thu Jun 29, 2006 12:47 pm
Location: In my inbox.

Post by ShockSlayer »

78012 :lol:

SS
http://twitter.com/ShockSlayer" onclick="window.open(this.href);return false;
c_mon
Portablizer Extraordinaire
Posts: 464
Joined: Fri Jan 05, 2007 11:45 am
Location: Turkey

Post by c_mon »

The regulator provides 1A current. Is it enough for gamecube and screen? I don't thinks so. Is there a regulator providing 2A current?
Gamelver
Moderator
Posts: 3352
Joined: Sun Apr 04, 2004 9:03 pm
Location: in my basement, to forever work on portables ;)

Post by Gamelver »

you don't need to covert it down...14.8V works fine, since it gets converted anyway (and the 14.8V works fine for sound).

if you for some reason wanted less battery life, you could use a 7812 :P.
Without games my life would have no meaning.
Well, I guess it would, but it would be a lot less fun!!!!!!!

Image
timmeh87
Senior Member
Posts: 3047
Joined: Mon Nov 14, 2005 10:19 pm
Location: Ontario, Canada

Post by timmeh87 »

is the gamecube power supply a switching regulator?
Image

"Linux is only free if your time is worthless"
Skyone
Moderator
Posts: 6390
Joined: Tue Nov 29, 2005 8:35 pm
Location: it is a mystery
Contact:

Post by Skyone »

ShockSlayer wrote:78012 :lol:

SS
Phew - noooo.

The lowest I've seen a switching regulator (stepdown to 12VDC) support is 16 volts.
Turbo Tax 1.0
Portablizer Extraordinaire
Posts: 4773
Joined: Wed Mar 30, 2005 6:19 pm
Location: Delaware, no sales tax
Contact:

Post by Turbo Tax 1.0 »

Skyone wrote:
ShockSlayer wrote:78012 :lol:

SS
Phew - noooo.

The lowest I've seen a switching regulator (stepdown to 12VDC) support is 16 volts.
i actually have a 7812 :P dont know why i thought i would need it awhile ago
when life gives you lemons make flux
Image
snesp mk4
shmagoogin77
Portablizer
Posts: 1469
Joined: Sun Apr 17, 2005 6:10 pm
Location: My desk

Post by shmagoogin77 »

timmeh87
Senior Member
Posts: 3047
Joined: Mon Nov 14, 2005 10:19 pm
Location: Ontario, Canada

Post by timmeh87 »

you can also get 7815, 7818, and 7824s
Image

"Linux is only free if your time is worthless"
Electric Rain
Senior Member
Posts: 1911
Joined: Tue Mar 29, 2005 12:39 pm
PSN Username: Denki_no_Ame
Location: What's it to you? Stalker...

Post by Electric Rain »

Besides, a 11.1V Li-Ion pack may drop down to about 8.4V once drained... ('Zat about right? 2.8V per cell or so??? Just a thrown out number...)
Image
Gamelver
Moderator
Posts: 3352
Joined: Sun Apr 04, 2004 9:03 pm
Location: in my basement, to forever work on portables ;)

Post by Gamelver »

single cell lithium batteries usually start at 3.7 full charge and go down to around 2.7V or 2.8V (can't remember). This is around when they're quite low on energy, anyway.....but yeah, a 14.8V battery in this case would be better, as you can drain the battery (by playing, of course :P) before charging it again.
Without games my life would have no meaning.
Well, I guess it would, but it would be a lot less fun!!!!!!!

Image
timmeh87
Senior Member
Posts: 3047
Joined: Mon Nov 14, 2005 10:19 pm
Location: Ontario, Canada

Post by timmeh87 »

the charging strategy employed by most devices today is to cut them off at 3.0v, probably to try to save them from idiots who fully drain their battery every time and junk. and also, 2.8v is ok but then if you store it for a long time the protection might trip as the cells naturally continue discharging.

the 'elbow' is at or just before 3.0v, there is almost no power between 3.0v and 2.7v, so you might as well just stop at 3
Image

"Linux is only free if your time is worthless"
Electric Rain
Senior Member
Posts: 1911
Joined: Tue Mar 29, 2005 12:39 pm
PSN Username: Denki_no_Ame
Location: What's it to you? Stalker...

Post by Electric Rain »

*nods head back and forth* Yeah, that's pretty much what I figured.

Edit: W00t! 700th post! I'm in... *checks member list* 72nd place... wow... You guys have far too much time on your hands. :lol:
Image
Post Reply