First laptop...

Want to just shoot the breeze? Forum 42 is the place!

Moderator: Moderators

Post Reply
Felino
Posts: 1010
Joined: Thu Jan 18, 2007 12:51 am
Location: Australia.

First laptop...

Post by Felino »

First off, about me! I am not a noob in any way to electronics... nor to building cases and things.. *whew* glad I got that over... :wink:

Now I really wan to make a micro laptop, kinda like the Mini C64 project seen on HAD a little while ago. Now, I was wondering... I am going to use a PSone screen.. that sort of sets my main size small.. I want this to look professional... I got most of what I want set out... except :oops: what guts I am going to put in it.. :roll:

Now, my first though was an atari 2600, cut down to the costom 4 x 4" square.. then I though more about it and then thought of the atari 800. Then I could add a keyboard and basic on it... Then the graphics looked at me, also the rarety of this thing in Australia.. (were I live....) My attention then moved on.. to the NES and C64... which of these do you think would be best to chuck into a costom laptop? I would prefer to use an older system, one with good graphics.. and mabye (if the quality) mabye even a on-a-chip unit... how accurate are they at emulating a system? I think having a keyboard would be nice.. but not necessary..

What do people think? I have knolage in things.. and am looking for a bit of a chalange... any suggections?
Charlie wrote:I always wanted to try wall flips, but I'm too attached to my neck.
Image
Retromaster
Portablizer
Posts: 791
Joined: Wed Nov 22, 2006 11:03 pm
Location: florida- the land of old people
Contact:

Post by Retromaster »

Wow.....looks like your plan will work....go for it.....
btw, were you inspired by ben's atari 800 laptop?
Felino
Posts: 1010
Joined: Thu Jan 18, 2007 12:51 am
Location: Australia.

Post by Felino »

No, not really, I was inspired by my own genius!
But what to gut it with... I am still going to do a N64 laptop later in the year... after I do a smaller more compact one nowish... any thoughts on that?
Charlie wrote:I always wanted to try wall flips, but I'm too attached to my neck.
Image
SpongeBuell
Senior Member
Posts: 5190
Joined: Wed Apr 07, 2004 10:52 am
Location: Colorado
Contact:

Post by SpongeBuell »

I think the NES on a chip would be pretty good in your case, if you can find one. Just remember, sometimes laptops aren't the best option when you can use "fixed" portables.
Life of Brian wrote:
RYW wrote:RYW:

Rare
Yellow
Weasel
I'll be honest with you - I would have never guessed that.
joevennix
Portablizer
Posts: 999
Joined: Sat Jan 14, 2006 9:34 am
Location: On permanent vacation from reality.

Post by joevennix »

I'd say the C64: it can do many more things, in terms of peripherals and programming, where as the NES is just a general gaming platform, and would be more suitable as a handheld.
Image
Felino
Posts: 1010
Joined: Thu Jan 18, 2007 12:51 am
Location: Australia.

Post by Felino »

Did some googling... can somone give me some pictures / info about the SNES mobo?

With the C64, even though you can get it 'on a chip' I have never seen one in australia... I think that is the main issue with using that.

I will probably use one of the two mentioned above though... other than the picadore 64, has anyone else done major modding to a c64 on a chip? Even a portable out of it? Are there many issues with doing this to one?
Charlie wrote:I always wanted to try wall flips, but I'm too attached to my neck.
Image
dudex77
Posts: 1499
Joined: Thu Nov 16, 2006 10:43 am
Location: Spain

Post by dudex77 »

ive seen a load of famiclones with keyboards and basic already loaded in you should look for one of them
Kurt_ wrote: I would use tact switches but I want the mushy feel. Mushy = God. (I typed that correctly).
Image
gamemasterAS
Senior Member
Posts: 3310
Joined: Thu Nov 24, 2005 10:30 pm
Steam ID: lolz1337face
Location: Ohio
Contact:

Post by gamemasterAS »

c64's look like they can be fun.
.
Felino
Posts: 1010
Joined: Thu Jan 18, 2007 12:51 am
Location: Australia.

Post by Felino »

dudex77 wrote:ive seen a load of famiclones with keyboards and basic already loaded in you should look for one of them
Can you get SNES versions as well? How good is the emulation of the NES or SNES?
Charlie wrote:I always wanted to try wall flips, but I'm too attached to my neck.
Image
Unidentified Assilant
Senior Member
Posts: 2531
Joined: Thu Oct 21, 2004 12:26 pm
Location: Yea I like machine head

Post by Unidentified Assilant »

Amiga laptop.
Image

Somebody please buy my Dreamcast >_> £20+shipping :)
Felino
Posts: 1010
Joined: Thu Jan 18, 2007 12:51 am
Location: Australia.

Post by Felino »

Wha?

I think I might go with mabye the flashback 2.. modded with cart input....
Charlie wrote:I always wanted to try wall flips, but I'm too attached to my neck.
Image
dudex77
Posts: 1499
Joined: Thu Nov 16, 2006 10:43 am
Location: Spain

Post by dudex77 »

Felino wrote:
dudex77 wrote:ive seen a load of famiclones with keyboards and basic already loaded in you should look for one of them
Can you get SNES versions as well? How good is the emulation of the NES or SNES?
no its because the famicom in japan actually was like a computer so it had a keyboard and basic among other things such as a mic in the controller. also snoacs are quite a rare thing. its not emulation at all its just technology from the late 80s made smaller with our knowledge today
Kurt_ wrote: I would use tact switches but I want the mushy feel. Mushy = God. (I typed that correctly).
Image
Post Reply