Cool GBC mods

Want to just shoot the breeze? Forum 42 is the place!

Moderator: Moderators

Nick
Posts: 320
Joined: Fri Jan 06, 2006 3:12 pm
Location: ....I forgot.

Post by Nick »

...If you can get a microcontroller for under $10.
Refusing to change my avatar since like freakin 2007.
joevennix
Portablizer
Posts: 999
Joined: Sat Jan 14, 2006 9:34 am
Location: On permanent vacation from reality.

Post by joevennix »

You usually can...
Image
Nick
Posts: 320
Joined: Fri Jan 06, 2006 3:12 pm
Location: ....I forgot.

Post by Nick »

Really? The one I saw at Radioshack was $99.
Refusing to change my avatar since like freakin 2007.
joevennix
Portablizer
Posts: 999
Joined: Sat Jan 14, 2006 9:34 am
Location: On permanent vacation from reality.

Post by joevennix »

That was a Basic STAMP, a microcontoller that can read basic and is very expensive. The 'shack inflation of prices doesn't help either.
A regular PIC Microcontroller can be as low as $5.
Image
marshallh
Moderator
Posts: 2987
Joined: Sat Sep 10, 2005 2:17 pm
360 GamerTag: marshallh
Location: here and there
Contact:

Post by marshallh »

I'm currently modding my N64 and I'musing a red,green, and blue led to give me any colorI want.I am programming a PIC16F628 to vary each of their brightnesses by PWM.

You might think about that.
Image
Harshboy
Portablizer
Posts: 3610
Joined: Tue Oct 11, 2005 3:44 pm

Post by Harshboy »

Mods:

light up the buttons
Light up the case
Paint it a color which was not available (Red?)
Make it able to use a NES controller
Move the battery and cart slots

...i've got a lot of ideas
wallydawg
Senior Member
Posts: 2233
Joined: Mon Apr 05, 2004 11:28 am
Location: Sorry Illinois
Contact:

Post by wallydawg »

You can add a floppy drive to it, but I guess that would cost more than $10 and I'm too lazy to find the thread that I saw it in.
Image
Skyone
Moderator
Posts: 6390
Joined: Tue Nov 29, 2005 8:35 pm
Location: it is a mystery
Contact:

Post by Skyone »

wallydawg wrote:You can add a floppy drive to it, but I guess that would cost more than $10 and I'm too lazy to find the thread that I saw it in.
Gameboy Color Floppy Drive
blackbox_dev
Senior Member
Posts: 1906
Joined: Sun Jan 15, 2006 5:19 pm
Location: Formerly known as iam7805

Post by blackbox_dev »

My favorite kind of microcontroller is the PICAXE. Its a PIC with a special bootloader pre-flashed and understands a special kind of Basic. The programmer connects directly to two pins of the chip, and is just a couple resistors attached to a serial cable. Usually the PICAXE costs around $5 CAD for an 8 pin chip and up to $20 for a 40 pin chip. I buy them from http://www.hvwtech.com which is a company in Calgary. :)
I'd imagine right now you wish you were a cuttlefish...
CronoTriggerfan
Moderator
Posts: 4131
Joined: Fri Jan 27, 2006 3:07 pm
Location: University of Michigan - Ann Arbor
Contact:

Post by CronoTriggerfan »

I've decided to overclock it, paint it red, and maybe replace the "POWER" LED with a blue one :wink: . Anyways, where can you get those 10mhz crystals mentioned in the GBC overclock page? Radio Shack? Also, what kind of LED should replace the red power one?

Thanks,
CTFan
Image
Neildo_64
Portablizer
Posts: 852
Joined: Sun Jan 29, 2006 9:09 pm
Location: Iowa

Post by Neildo_64 »

About the red case and the Blue LED, that would look a bit odd dont you think? Maybe like a light blue case and a blue LED. I dont know, just my opinion - I think a light blue case and blue LED would look Aw3S0m3z!!1!.

As far as the LED, pretty much any LED that is the same size should work. Go to radioshack and buy one of the 20 asst LED packages (they cost like $2-3 and are SO much cheaper this way and they are the same thing that costs like 1.79 a piece!) and then use one of the small ones. Only I dont think they ever come with blue. Usually green, red, white, and yellow is all they have. :?
Skyone
Moderator
Posts: 6390
Joined: Tue Nov 29, 2005 8:35 pm
Location: it is a mystery
Contact:

Post by Skyone »

CronoTriggerfan wrote:I've decided to overclock it, paint it red, and maybe replace the "POWER" LED with a blue one :wink: . Anyways, where can you get those 10mhz crystals mentioned in the GBC overclock page? Radio Shack? Also, what kind of LED should replace the red power one?

Thanks,
CTFan
Digikey.com, and Jameco.com . I'm also making a Gameboy and Gameboy Pocket overclock/underclock mod tutorial. Keep your eyes peeled!
CronoTriggerfan
Moderator
Posts: 4131
Joined: Fri Jan 27, 2006 3:07 pm
Location: University of Michigan - Ann Arbor
Contact:

Post by CronoTriggerfan »

Cool! What's the digikey part # for it?
Image
Skyone
Moderator
Posts: 6390
Joined: Tue Nov 29, 2005 8:35 pm
Location: it is a mystery
Contact:

Post by Skyone »

Digikey #535-9065-1-ND is just like the one pictured in that tutorial, except it's SMD, nice and small. You may be able to actually FIT this IN the Gameboy Color.

Digikey #X057-ND is the exact same one pictured in the tutorial, it's pretty big obviously.


Good luck! Ask if you need help, I've performed this mod 3 times in the past month, feel free to ask!



Oh, and it's really great with games like Pokémon, where it takes an hour to get across the screen.
Unidentified Assilant
Senior Member
Posts: 2531
Joined: Thu Oct 21, 2004 12:26 pm
Location: Yea I like machine head

Post by Unidentified Assilant »

Spray paint the case Electric Blue, NES buttons, Floppy Drive, External SNES controller support... I could go on a lot :D
Image

Somebody please buy my Dreamcast >_> £20+shipping :)
Post Reply