Does rgb have a difference between pal and ntsc?

jeroen · Post by **jeroen** » Tue Apr 18, 2006 4:40 am

See title please.

ArtemisGoldfish · Post by **ArtemisGoldfish** » Tue Apr 18, 2006 9:27 am

It should still have the different Refresh rates (50/60). Just because it's a different plug, doesn't mean it has different standards.

jeroen · Post by **jeroen** » Tue Apr 18, 2006 9:43 am

Yeah I meant the refresh rates actually.

Post by **marshallh** » Tue Apr 18, 2006 1:22 pm

No. RGB uses a composite sync signal which is around 15.2KHz, regardless of region.

jeroen · Post by **jeroen** » Tue Apr 18, 2006 2:02 pm

So does that mean I can use an ntsc plastation screen for my pal gamecube. (No worry pal gc do output rgb ha!)

daleighan · Post by **daleighan** » Tue Apr 18, 2006 2:38 pm

probably

blackbox_dev · Post by **blackbox_dev** » Tue Apr 18, 2006 7:15 pm

Just do it! You have a very slim chance of breaking anything because the LCD does not have a tube that fires the pixels. The refresh rate is how fast it sweeps from one side to the other. If you try too high of a refresh rate in a CRT, it will fry itself. An LCD on the other hand will just give you some messed up graphics.

Or I'm tottaly wrong on this? Could someone smart correct me on this if need be?