A contradiction in G-Force's Plan!

demonofaj · Post by **demonofaj** » Mon Apr 17, 2006 4:18 pm

Well apparently G-Force used the Pirated controller IC to fuel his controller board...but can I swap that with an IC from a NES controller (official).

Turbo Tax 1.0 · Post by **Turbo Tax 1.0** » Mon Apr 17, 2006 4:20 pm

yeah but yopull need to add the resistors and junk

demonofaj · Post by **demonofaj** » Mon Apr 17, 2006 4:21 pm

But WHY do I NEED resistors?

Metroid fan · Post by **Metroid fan** » Mon Apr 17, 2006 4:26 pm

Why don't you want to use them just buy some they're cheap!

Post by **gannon** » Mon Apr 17, 2006 4:32 pm

The pull up resistors are so that the button presses register correctly. Otherwise if you just leave the button lines floating static can influence them and cause false presses.

demonofaj · Post by **demonofaj** » Mon Apr 17, 2006 5:25 pm

Yea about the use IC thing...I cut so hard that the traces kinda peeled off...hard to explain....

G-force · Post by **G-force** » Tue Apr 18, 2006 3:21 pm

Well you should still have another controller pad from the super joy 3 (they come with the player 1 controller and a player 2 controler) you could use it. Or buy bens book and he tells you how to wire up the NES controllers IC with resistors. Or I imagine if you look on google enough you coudl find a pinout somewhere.

Of if you think you're up to it, just use use a meter to find out the resistor value used for the weird black cheapie resistors on the NEs controller and then follow the traces on the NES controler to see how to wire the resistors to the IC.

demonofaj · Post by **demonofaj** » Tue Apr 18, 2006 3:27 pm

Thanks, with the cart slot done...the apocalypse shall come...I just hope I don't screw it up like Shao Khan did in MK:A