Another Mind Molester

Want to just shoot the breeze? Forum 42 is the place!

Moderator: Moderators

Post Reply
Radon199
Posts: 949
Joined: Sun May 01, 2005 6:49 pm
Location: Canada

Another Mind Molester

Post by Radon199 »

Well I'm sure some of you have seen the Mind Molester on ThinkGeek for $25 US and most of you will have seen the one on Hack-A-Day thats around 50% less than what the Mind Molester retails for. Well Ive been wanting to get one for a whyle but I cannot justify spending $25 US on esentualy a Pezio, some resistors, a chip and some batery contacts (they don't even include a battery -.-;) so when the hack came around I was overjoyed... but I have no idea how to program in basic nor wanted to order a chip online, so I went looking and found my solution a LM555 Timer Chip, avalable at my local Source by CC for $4 CAD. Heres what I was able to make out of crap I found in my room, it totals to around $6 CAD.

The Diagram, so anyone can make it :P
Image

The front of the board.

Image

And heres the back, ignore my totaly crap soldering skillz, I have to rewire many times to get it to work as I wanted it too.
Image

So far it's working great, It sends out a resonably loud beep lasting around 1 second every 2 or so minutes. So far definatly worth it :P
Image
gamer2
Senior Member
Posts: 3611
Joined: Tue Jul 27, 2004 12:38 pm
Location: You spam, SANTA Jason gets you!
Contact:

Post by gamer2 »

What is this Device?
What does it do?
isnt Molestation a felony?
Image
Image
Jeff
Posts: 1402
Joined: Sun Dec 26, 2004 1:39 pm
Location: Probably banned soon...
Contact:

Post by Jeff »

gamer2 wrote:What is this Device?
What does it do?
isnt Molestation a felony?
1. Its a mind molester.
2. It beeps every 1-2 minutes to annoy someone.
3. Yes it is. But not mind molestation!
PS360Wii Fanboy FTW!
NES_fanatic
Posts: 1321
Joined: Tue Oct 11, 2005 2:46 pm
Location: Funkytown, USA

Post by NES_fanatic »

Oooooh-kay?

Mine's better. It just plays the same christmas song of your choise over and over.
Radon199
Posts: 949
Joined: Sun May 01, 2005 6:49 pm
Location: Canada

Post by Radon199 »

Basicly it's for the sole purpose of pissing people off, because the burst is so short and at such a high pitch, it seems like the sound is comeing from everywhere and with the 2 minute break inbetween the bursts makes it almost imposible to find, after 10 to 20 minutes of beeping people get really freaking fed up, ive seen people tear a room appart trying to find one.
Image
joevennix
Portablizer
Posts: 999
Joined: Sat Jan 14, 2006 9:34 am
Location: On permanent vacation from reality.

Post by joevennix »

That's pretty cool... I have a spare 555, maybe I'll try this. I'm sure tweaking the resistor values a bit wouldn't do much...
Image
Radon199
Posts: 949
Joined: Sun May 01, 2005 6:49 pm
Location: Canada

Post by Radon199 »

Actually, the First resistor controlls how long the beep is, the second controlls the langth of the weight. R3 controls the volume of the pezio so you don't blow out your ears and the Cap doubles the time. A 100 uf cap makes it around 40 sec and half a second beep, 420 uf is 4 minutes of wait and 3 seconds of beep.
Image
S q u e e !
Posts: 835
Joined: Wed Feb 16, 2005 11:31 am
Location: Lost. Are you my mommy?

Post by S q u e e ! »

Any specific piezo? Any specific type of cap?
"I like my coffee like I like my women. In a plastic cup."

~Eddie Izzard
Radon199
Posts: 949
Joined: Sun May 01, 2005 6:49 pm
Location: Canada

Post by Radon199 »

Not really lol, just a Piezo that I found at The Source, just make sure it can handle between 5-12V so you can run it off a 9v battery.

The cap I just desolderd off an old modem :P
Image
S q u e e !
Posts: 835
Joined: Wed Feb 16, 2005 11:31 am
Location: Lost. Are you my mommy?

Post by S q u e e ! »

Well, after looking, it appears to be electrolytic, but does it honestly matter?
"I like my coffee like I like my women. In a plastic cup."

~Eddie Izzard
Radon199
Posts: 949
Joined: Sun May 01, 2005 6:49 pm
Location: Canada

Post by Radon199 »

Id guess no. I can't say I understand half of what I build, most of the time I try untill something works :P
Image
joevennix
Portablizer
Posts: 999
Joined: Sat Jan 14, 2006 9:34 am
Location: On permanent vacation from reality.

Post by joevennix »

Believe it or not I had all the things needed for this one right in my drawer. Here's the finished product:

Image

I still need to trim the board down a little
Sorry that it's so blurry...
Image
Post Reply