PS2 A/V Pinout-Please!

segasonicfan · Post by **segasonicfan** » Fri Nov 12, 2004 9:29 pm

Hey people,

I've got my new PS2 slim all taken apart and I need to know where the RGB and sync lines are on the output. The diagram at GameSX.com is only for PSX, and while they are supposively the same, the PSX doesn't have Sync which must be different from the PSone because it had RGB when connecting to the PSOne screen...

So I need to know the A/V pinout for the PS2...anyone know where I can find one?

-Segasonicfan

Post by **Sparkfist** » Fri Nov 12, 2004 9:34 pm

If the PS2 v2 has the same a/v output as PSOne and the old PS2 than us this. http://www.gamesx.com/avpinouts/psxav.htm

segasonicfan · Post by **segasonicfan** » Fri Nov 12, 2004 9:39 pm

If that's true, then the PSone and PS2 don't have Sync...Cause it says you have to use an LM1881. But how did the PSOne Connect to the PSOne screen through RGB? I'm just trying to do the same thing (with the same screen) for the PS2...

segasonicfan · Post by **segasonicfan** » Fri Nov 12, 2004 9:41 pm

Also, it would really help if I had the numbering from the PCB itself. But it looks like I'm on my own for that (since Lawrence is too arrogent to ever put PCB numbering on his site). Looks like it'll go up on my site when I'm done...

-Segasonicfan

Post by **gannon** » Fri Nov 12, 2004 9:41 pm

The psone ad ps2 use the luma line for C sync.

segasonicfan · Post by **segasonicfan** » Fri Nov 12, 2004 9:50 pm

Thanks gannon

BTW, I LOVE your icon.. Family Guy is the best

-Segasonicfan

sniper_ps2 · Post by **sniper_ps2** » Fri Dec 03, 2004 9:17 pm

im looking also to run a psone screen of a ps2, but with the red/yellow/white and ground wires setup i have no idea where to attach to the controller board, they also speak of a lot of different coloured wires and i only have the 5 to work with.

Please help

JackFrost22 · Post by **JackFrost22** » Fri Dec 03, 2004 9:19 pm

ignore rgb input do a search on the forums for psone screen piout and go to the last diagram on like page 3-4

HK-47 · Post by **HK-47** » Fri Dec 03, 2004 9:24 pm

Mr. MOds diagram of how to hook something up using rbg.

JackFrost22 · Post by **JackFrost22** » Fri Dec 03, 2004 9:26 pm

he doesnt wanna use rgb though

HK-47 · Post by **HK-47** » Fri Dec 03, 2004 9:29 pm

Use this then.

JackFrost22 · Post by **JackFrost22** » Sat Dec 04, 2004 7:07 am

Thats what I said I just didn't wanna search

sniper_ps2 · Post by **sniper_ps2** » Sat Dec 04, 2004 6:19 pm

i still am having problems, do i connect the yellow to the composite (slot2 pin 1), red and white to slot 2 pin 2 & 3, and the sorrounding cords (grounds?) connect to slot 2 pin 4. After this and the 5v power mod... will my ps2 connect to this.

I've also been told that dvd games won't work, why? and if i have a ps2 with hdd & cd or dvd boot disks if i can get it to boot off the cd version could i play dvd games off my hdd??

HK-47 · Post by **HK-47** » Sat Dec 04, 2004 6:24 pm

Well you got the mod right, those cords are grounds... As for the DVD issue, sony dosn't want people using the ps2 as a piracy tool so they corrupted the highest level of video (RBG, as in Red, Blue, and Green) so you cant get a perfect signal from Dvds... I slaughtered that explination... But if you look around the subject has been discussed many times.

sniper_ps2 · Post by **sniper_ps2** » Sat Dec 04, 2004 6:38 pm

so will hooking it up like i said work just it has a lower quality?