How much money should I spend?

Want to just shoot the breeze? Forum 42 is the place!

Moderator: Moderators

Post Reply
Kurt_
Portablizer
Posts: 5748
Joined: Thu Nov 24, 2005 10:32 am
Steam ID: kurbert
Location: Ontario, Canada
Contact:

How much money should I spend?

Post by Kurt_ »

Here's my predicament.
(All money is Canadian)

Currently I have spent $135 on my project.

Interact PS1 screen (broken) with PS1: $55
Verge PS2 screen: $45
SNES v3 (broken): $35

And I'm planning on spending about $60 on a SNES.

The problem is, the batteries I want (that are 6550mah and will save so much space) with a protection circuit and a charger (with shipping included) is roughly $105.

Should I spend a total of $300 on a SNESp? Or should I go with some cheaper, bulkier, not-as-good batteries?

(For those interested: Two of these, two of these, and one of these

(I should mention that I DO have plenty of money, but I don't want to spend unneccesary money that I don't have to)
Hey, sup?
marshallh
Moderator
Posts: 2987
Joined: Sat Sep 10, 2005 2:17 pm
360 GamerTag: marshallh
Location: here and there
Contact:

Post by marshallh »

Ok, I'm not going to give you my normal "Li-Ions Are Bad" speech, but are you sure you want to risk using Li-Ion/Poly batteries? For $16, you can get 6 of these rechargeable AAs (http://www.allelectronics.com/cgi-bin/i ... _MAH_.html)
and you'll be set with 2300mAh. You can even wire two sets of these in parallel to get 4600mAh. And you won't have your batteries degrading in 2 years like Li-Ion (provided you have a charger that can handle it.)

My guess is, once you manage to build your SNESp, you'll see lots of ways you can improve it. Then you'll build another system, and I suggest you save your Li-Ions for that.

It's your call, but if I were you I'd just go the proven Ni-MH route.
Image
Kurt_
Portablizer
Posts: 5748
Joined: Thu Nov 24, 2005 10:32 am
Steam ID: kurbert
Location: Ontario, Canada
Contact:

Post by Kurt_ »

I was planning on going Ni-MH, but 6 AA's seems a little big, especially since I'm planning on making my SNESp ub3r small.

And everybody is talking about 6 AA's. Last time I checked thats 0.3V short of the regulator's minimum input. Can somebody explain this to me pleasE?
Hey, sup?
cennar
Senior Member
Posts: 2939
Joined: Wed Jun 02, 2004 7:57 am
Location: yesterdays brothel, and todays vaccume store
Contact:

Post by cennar »

i would go with the old 7.2 rc car battry not only is it what every one else is using, the fact that it will work with not much effort is a bonus. the more time you can put into the case and controls the better :D
Image
Turbo Tax 1.0
Portablizer Extraordinaire
Posts: 4773
Joined: Wed Mar 30, 2005 6:19 pm
Location: Delaware, no sales tax
Contact:

Post by Turbo Tax 1.0 »

kurt id reccomend stayin away from li-polys on a first portable they almost blew up in my face
when life gives you lemons make flux
Image
snesp mk4
Kurt_
Portablizer
Posts: 5748
Joined: Thu Nov 24, 2005 10:32 am
Steam ID: kurbert
Location: Ontario, Canada
Contact:

Post by Kurt_ »

But you don't have an older brother who will yell at you when you do something wrong. Note that I was getting a special Li-Ion charger and a protection circuit so that they DON'T blow up in my face. Another alternative that I would enjoy is the 3.7V Li-Ion batteries that include a protection circuit. They're much cheaper, but I'm afraid that the width of them is too much. I won't know though, until I get my mini SNES and see everything together.

Can anybody point me towards a Canadian store? Shipping from America plus all the duties and such is killer.

EDIT: heh...http://www.canadianbattery.com/
Hey, sup?
timmeh87
Senior Member
Posts: 3047
Joined: Mon Nov 14, 2005 10:19 pm
Location: Ontario, Canada

Post by timmeh87 »

to solar car uses lithium batteries (imagine this: 25kg of li poly batteries. thats 55 pounds).

if i dont know something, someone else on the team does. as long as kurt ASKS for help...

anyhow, kurt, you should stop wasting money. and yeah.. go with nimhs if only becauase of cost. just pretend its your penalty for breaking a system and a screen.
Image

"Linux is only free if your time is worthless"
Radon199
Posts: 949
Joined: Sun May 01, 2005 6:49 pm
Location: Canada

Post by Radon199 »

Ben uses Sony Infolithium L batterys. They get around 1800 mAh at 7.2 V but you can also convert them down to 3V or w/e a SNES uses. The good thing about these batterys is they are really small, about the size of 2 AAs. Plus if you get an external charger you can buy a new battery if you want and keep a spare battery around for double the play time.

1 InfoLithium L and a charger can cost around $80 CAD and a single battery costs around $48 CAD.
Image
Turbo Tax 1.0
Portablizer Extraordinaire
Posts: 4773
Joined: Wed Mar 30, 2005 6:19 pm
Location: Delaware, no sales tax
Contact:

Post by Turbo Tax 1.0 »

i got the same kinda battery ben uses and a charger for about 20$ on ebay
when life gives you lemons make flux
Image
snesp mk4
Radon199
Posts: 949
Joined: Sun May 01, 2005 6:49 pm
Location: Canada

Post by Radon199 »

See even more reason to use a Sony bettery :P

I tryed to convince my dad to let me use his Sony InfoLithium L batterys and charger we have but they were for out DV camera and he didn't want me to blow them up :P
Image
Kurt_
Portablizer
Posts: 5748
Joined: Thu Nov 24, 2005 10:32 am
Steam ID: kurbert
Location: Ontario, Canada
Contact:

Post by Kurt_ »

There really are some good cheap Infolithiums on ebay. It's another thing to consider. In the end it'll wittle down to what fits best.
Hey, sup?
Post Reply