MY nes micro concept (WARING a lot LIKE BENS)

MaDnEsS · Post by **MaDnEsS** » Fri Dec 30, 2005 1:30 am

this is my concept basicly the only thing that im doing different is using a 60-72pin converter

Post by **gannon** » Fri Dec 30, 2005 12:59 pm

I made a design that was similar, but I made it like Ben's first NOACp, even using the original NES controller.
I even made designs for using either a hip screenpad or Ben's Phoenix LCD

http://bb.1asphost.com/gannon/nesp_front.bmp
http://bb.1asphost.com/gannon/nesp_front35.bmp
http://bb.1asphost.com/gannon/nesp_back.bmp

Radon199 · Post by **Radon199** » Fri Dec 30, 2005 2:42 pm

I would like to make a NOAC but ironicly I don't own any NES games.

Seems like a good concept useing a family converter instead of building your own, solves a lot of the things that can go wrong.

XPCportables · Post by **XPCportables** » Fri Dec 30, 2005 2:46 pm

I should make an Nes MACRO

MaDnEsS · Post by **MaDnEsS** » Fri Dec 30, 2005 4:30 pm

Radon199 wrote:I would like to make a NOAC but ironicly I don't own any NES games.

they are sold on Ebay or at EB games

sock2828 · Post by **sock2828** » Fri Dec 30, 2005 10:37 pm

[quote="Radon199"]I would like to make a NOAC but ironicly I don't own any NES games.

i dont have any NES games either but i am making a nesp

Turbo Tax 1.0 · Post by **Turbo Tax 1.0** » Fri Dec 30, 2005 11:37 pm

MaDnEsS wrote:this is my concept basicly the only thing that im doing different is using a 60-72pin converter

that looks vaguely familiar to a NOACp ive seen before

but really dont expect it to be easy to cram it all togather like ben he is a guru and his micro is truly smashed together tight

good luck though and i hope it comes together well

wallydawg · Post by **wallydawg** » Fri Dec 30, 2005 11:52 pm

I can't see Gannon concepts.

(bandwith exceeded)

MaDnEsS · Post by **MaDnEsS** » Sat Dec 31, 2005 1:07 am

Turbo Tax 1.0 wrote:
MaDnEsS wrote:this is my concept basicly the only thing that im doing different is using a 60-72pin converter

that looks vaguely familiar to a NOACp ive seen before
but really dont expect it to be easy to cram it all togather like ben he is a guru and his micro is truly smashed together tight

good luck though and i hope it comes together well

yeah i know its going to be hard i plan to do it like his where i have a small box in the center for audio/video screen

shmagoogin77 · Post by **shmagoogin77** » Sat Dec 31, 2005 4:02 pm

doesnt it make it smaller to use 2 5.25 floppy cables than a 60-72 pin connector like ben did?

MaDnEsS · Post by **MaDnEsS** » Sat Dec 31, 2005 5:52 pm

i know the 60-72 pin converter will not make it smaller it will however make the cartrige stick out further not that much further though

Post by **Triton** » Sat Dec 31, 2005 7:10 pm

if i had a lot of money and time i could probably make a noac smaller than bens, get a tiny lcd and use a very small 5v li-on batt. i might work on the design later

MaDnEsS · Post by **MaDnEsS** » Sun Jan 01, 2006 2:31 pm

thats the #1 most expensive thing the screen i probly will buy a portable tv for $40 and use that

psychotic_mechanic · Post by **psychotic_mechanic** » Tue Jan 03, 2006 12:10 am

Why bother with all of the diffuculty making the system so small when the cartridge is so large? Make it the size of a catridge so it's like holding an NES cart sandwhich when playing. (Same L/W but twice as thick) I'm planning a small NOAC based system this size.

benheck.com Forums

MY nes micro concept (WARING a lot LIKE BENS)

MY nes micro concept (WARING a lot LIKE BENS)

Re: MY nes micro concept (WARING a lot LIKE BENS)

Re: MY nes micro concept (WARING a lot LIKE BENS)