Controller question
Moderator: Moderators
-
marksalot06
- Posts: 17
- Joined: Sat May 28, 2005 8:15 pm
Controller question
How do i wire/solder my controller board up so that controller slot one can be used internally and externally?
-
gannon
- Moderator
- Posts: 6974
- Joined: Sun Apr 04, 2004 4:48 pm
- Location: Near that one big lake
- Contact:
This should help:
http://benheck.com/v-web/bulletin/bb/vi ... .php?t=115
http://benheck.com/v-web/bulletin/bb/vi ... .php?t=115
does it have to be switched? an't you just do this;

I was under some strange illusion I could just do it that way, but it has to be switched? What should be switched power and data? or ground?
I was going to integrate a system link port that allowed for external controls as well, but it will have to be switched? bugger.

I was under some strange illusion I could just do it that way, but it has to be switched? What should be switched power and data? or ground?
I was going to integrate a system link port that allowed for external controls as well, but it will have to be switched? bugger.