Bush's tiny N64p: The Whacka 64 (FS/Commission!)
Moderator: Moderators
Re: Bush's tiny N64p: The Whacka 64 (FS/Commission!)
I know this. Thats why I changed to thicker wire. I now get the max voltage that the pth08080 gets with a 2k resistor.
Re: Bush's tiny N64p: The Whacka 64 (FS/Commission!)
Yeah, lower wire gagues (thicker wires) are better at carrying power than thinner (higer wire gagues).
Home wiring wire ranges 3-14 AWG* from Speaker wire 10-22 AWG, ethernet 20-24 AWG, telephone 22-26 AWG, and 30 gague ... low voltage signals, I guess.
If you scroll down to the calculator on powerstream.com and enter {30 AWG, 1 ft, 3VDC} you will see a drop of 0.211 V, where as 18 AWG will drop 0.013 V.
Using four bits of 30 AWG in parallel willdrop that drop to 1/4 (0.053 V) since the crosssection will increase 4 times, (equivalent to 24 AWG).
I'll spare the fancy math and suggest doubling up the speaker wire to see if that brings you that last bit of voltage.
*I've seen 16 used, but it isn't reccomended.
Home wiring wire ranges 3-14 AWG* from Speaker wire 10-22 AWG, ethernet 20-24 AWG, telephone 22-26 AWG, and 30 gague ... low voltage signals, I guess.
If you scroll down to the calculator on powerstream.com and enter {30 AWG, 1 ft, 3VDC} you will see a drop of 0.211 V, where as 18 AWG will drop 0.013 V.
Using four bits of 30 AWG in parallel willdrop that drop to 1/4 (0.053 V) since the crosssection will increase 4 times, (equivalent to 24 AWG).
I'll spare the fancy math and suggest doubling up the speaker wire to see if that brings you that last bit of voltage.
*I've seen 16 used, but it isn't reccomended.
Re: Bush's tiny N64p: The Whacka 64 (FS/Commission!)
I love you, you helpful kitty you!
-
AdumUp
- Posts: 165
- Joined: Sun Feb 28, 2010 3:27 pm
- 360 GamerTag: AdumUp
- Steam ID: AdumUp
- Location: Louisville, Kentucky
Re: Bush's tiny N64p: The Whacka 64 (FS/Commission!)
Lookin pretty sexy sir, hope you get everything worked out so you can finally cram all that in there and finish this! 

-
lucidPerspective
- Posts: 435
- Joined: Fri Jun 04, 2010 10:03 pm
Re: Bush's tiny N64p: The Whacka 64 (FS/Commission!)
I'm guessing something like: box + N64 controller ports + wire + spraypaint ..right? 
-
humakabula1
- Posts: 728
- Joined: Sun May 30, 2010 3:11 am
- 360 GamerTag: H1writer
- Location: Diggi Down Under
Re: Bush's tiny N64p: The Whacka 64 (FS/Commission!)
Sounds bout' right
Wedgix (custom linux distro): 20% complete
-
Haunted360
- Posts: 1000
- Joined: Sat Jan 30, 2010 12:22 am
- PSN Username: Haunted360
- 360 GamerTag: Haunted 360
- Location: Australia
- Contact:
Re: Bush's tiny N64p: The Whacka 64 (FS/Commission!)
Very nice!
When you sell it, I reccomend then go towards Vacuum Forming.
When you sell it, I reccomend then go towards Vacuum Forming.
-
humakabula1
- Posts: 728
- Joined: Sun May 30, 2010 3:11 am
- 360 GamerTag: H1writer
- Location: Diggi Down Under
Re: Bush's tiny N64p: The Whacka 64 (FS/Commission!)
updates?
Wedgix (custom linux distro): 20% complete
Re: Bush's tiny N64p: The Whacka 64 (FS/Commission!)
I was waiting on a copulate resistor, which finally came.
-
iBurnXD
- Posts: 9
- Joined: Sun Sep 26, 2010 12:11 am
- PSN Username: Wall xmen
- 360 GamerTag: Maverik Duece
Re: Bush's tiny N64p: The Whacka 64 (FS/Commission!)
Nicely done!
. I cant wait to see this baby finished. It would have been cooler if that 4 player box was usb instead of vga sortof like shockslyers 6th. Its just more common. Other than that it looks great!
-
MarioOwnsAll
- Posts: 228
- Joined: Wed Mar 11, 2009 9:49 am
Re: Bush's tiny N64p: The Whacka 64 (FS/Commission!)
usb only has 4 pins, and you need atleast 5 to get all 4 players to work.iBurnXD wrote:Nicely done!. I cant wait to see this baby finished. It would have been cooler if that 4 player box was usb instead of vga sortof like shockslyers 6th. Its just more common. Other than that it looks great!
-
AdumUp
- Posts: 165
- Joined: Sun Feb 28, 2010 3:27 pm
- 360 GamerTag: AdumUp
- Steam ID: AdumUp
- Location: Louisville, Kentucky
Re: Bush's tiny N64p: The Whacka 64 (FS/Commission!)
An 8 pin USB would work, but it doesn't matter now that he has already assembled itMarioOwnsAll wrote:usb only has 4 pins, and you need atleast 5 to get all 4 players to work.iBurnXD wrote:Nicely done!. I cant wait to see this baby finished. It would have been cooler if that 4 player box was usb instead of vga sortof like shockslyers 6th. Its just more common. Other than that it looks great!

-
iBurnXD
- Posts: 9
- Joined: Sun Sep 26, 2010 12:11 am
- PSN Username: Wall xmen
- 360 GamerTag: Maverik Duece
Re: Bush's tiny N64p: The Whacka 64 (FS/Commission!)
i really wanna see how this little thing turns out
Are you still going with the button arrangement from your previous picture?
Are you still going with the button arrangement from your previous picture?

