NES A/V Mod

dankicksass · Post by **dankicksass** » Thu May 18, 2006 12:22 am

It is my understanding that there is a mod for the front-loading NES where one can take the five pins and ground that commonly lead to the RF box and achieve a standard A/V connection without the box, plus power-in. My RF box is pretty much destroyed from removal, so tracing the routes is pretty much out of the question for my board. I cannot find the procedure for the A/V mod on the forum or on the better NES sites, but I know it has been done. Can anyone help me?

StuntMonkey · Post by **StuntMonkey** » Sat May 20, 2006 1:48 am

try a search for nestable. best of luck

wallydawg · Post by **wallydawg** » Sat May 20, 2006 2:50 pm

The nestable site is http://www.classicgaming.com/nestable if that helps at all.

Nes Man · Post by **Nes Man** » Sun May 21, 2006 9:27 pm

Here is a link to the video mod, the audio can be taken right off the board. Looking at the top of the board the video pin is 1 (one closest to the cart.) Audio is pin 2 and Power (5+) is pin 3 (midde pin). Pins 4 and 5 are not used. Good Luck!