SNES motherboard help!

nes_newbie · Post by **nes_newbie** » Wed Dec 15, 2004 6:28 pm

Hello everyone , this is my first post and my name is Tim - you guys on here are freaking amazing. All the stuff i read on here about the portables everyone of you have made just blows my mind. I intend to start a SNESportable project of my own , but i could really use any help i can get on some matters. The specs i have are on the older version of the SNES,in fact the case i am using is the SNES with a 3 inch monitor in the back of it along with the controller on the back of it. All of it will fit after i gut it out and use a little Dremel magic

I also have the battery i intend on using - it will be a Radio Shack R/C Battery 7.2V 3000MA NIMH.If i need a different one please let me know.

My First Question is : What kind of Battery holder do i need to solder to the snes board in order for it to work?

Second Question is: I am good at soldering things but since i have never messed with the insides of the SNES and i will buy Ben's Book when it's released for the diagrams, but if there is anyway possible that any of you have any Diagrams on where to solder the Tv Monitor,Batterypack, and 1 snes controller to the Board of the SNES that would be very helpful for me,because as i said i have just started this project and have everything i need except the knowledge of where to solder each piece to the points of the snes motherboard.

Any help would be greatly appreciated
Thank You

JackFrost22 · Post by **JackFrost22** » Wed Dec 15, 2004 6:32 pm

www.doomportables.org in the SNES section and http://www.radioshack.com/product.asp?c ... d=23%2D444

HK-47 · Post by **HK-47** » Wed Dec 15, 2004 7:56 pm

Hope your portable turns out good.
The first link is a website with tons of useful info and its run by gannon and spongebuell. It as also owned by Allibi. The second link is to a part that alows you to attach 7.2v rc car batteries to your portable. These are pretty much the battery of choice for us portable makers. If you have any more questions feel free to ask. Also registering would help gain the trust of many members on the boards.

JackFrost22 · Post by **JackFrost22** » Wed Dec 15, 2004 8:00 pm

gannon and spoumgebuell???????? what about Allibi

Post by **SpongeBuell** » Wed Dec 15, 2004 8:02 pm

abbibi hasn't been around, and I have no idea when he will be.

JackFrost22 · Post by **JackFrost22** » Wed Dec 15, 2004 8:02 pm

but its still HIS site

Post by **SpongeBuell** » Wed Dec 15, 2004 8:04 pm

yeah, but he's not running it. Then again, he is paying for it

JackFrost22 · Post by **JackFrost22** » Wed Dec 15, 2004 8:04 pm

so he should gewt credit C'mom

HK-47 · Post by **HK-47** » Wed Dec 15, 2004 8:08 pm

HK-47 wrote:Hope your portable turns out good.
The first link is a website with tons of useful info and its run by gannon and spongebuell. It is also owned by Allibi. The second link is to a part that alows you to attach 7.2v rc car batteries to your portable. These are pretty much the battery of choice for us portable makers. If you have any more questions feel free to ask. Also registering would help gain the trust of many members on the boards.

JackFrost22 · Post by **JackFrost22** » Wed Dec 15, 2004 8:13 pm

Last edited by HK-47 on Wed Dec 15, 2004 8:09 pm; edited 1 time in total
But thanks for fixing it

Post by **SpongeBuell** » Wed Dec 15, 2004 8:14 pm

and everybody's calling him Allibi

JackFrost22 · Post by **JackFrost22** » Wed Dec 15, 2004 8:15 pm

it sounds better to me at least its how I pronounce it

HK-47 · Post by **HK-47** » Wed Dec 15, 2004 8:15 pm

I could call him Abraham Gaponoff if you wanted...

JackFrost22 · Post by **JackFrost22** » Wed Dec 15, 2004 8:16 pm

the whois search strikes again if I was a mod I'd probably hunt down you guys j/k

HK-47 · Post by **HK-47** » Wed Dec 15, 2004 8:19 pm

Thats a grim prospect...
[size=0]Do a whois search on benheck...[/size]