benheck.com Forums

You can use a psone screen(really any screen) on a GBA but it needs a GBA Transverter which I can't find anywhere. You can frontlight a GBA, here's a guide to do that. Here's a site where you can use a psone screen and other cool mods for GBA.

I need help. I've been always intrigued by modded portables, though I don't really find myself to actually make one. However, recently, I've decided it'd be a good project to brush up on my soldering skills, and learn a lot about hardware (who knows? Maybe it'll evolve into a hobby and I'll be ...

lol I thought about this exact idea awhile ago.

Shockslayer's video shows how to get the DS to work w/o the top screen.

Yep, I think they are some copper spots near the buttons that you can solder to.

Since in the pinout it says, 'Player 2 joypad for Game Gear in SMS Mode', so I'm thinking its going to work as player 2 with a SMS game. :wink:

The only problem I see with your idea is video output from the GG unless you are going to built the screen into the Genesis. I think I've found a way how ...

Adding a "game pad port" is really easy. All you need is DE-9 (DB-9) port and solder it to the GG Ext port.

Here's a pinout:

I accidentally broke a cap off of the nes motherboard. It was a 22uf 50v and I found a 22uf 100v cap. Would that work or would I have to get another cap?

Here is the closest thing to a PSP phone.

hellfire wrote:the only ones ive seen use the gamecube port, which sucks cause you cant have it wireless... but ive seen ps2 to wiimote adapters before.

Here's how you can make wireless nes/snes controller that plug into gamecube port.

First, you need to desolder the RF box if havent done so. Then you have to make a video amp from here to get a decent video output. After that, you just need to wire the jack to the amp and you're done.

Wow, this is going to be one awesome Nes HTPC.

I think you should use Bluetooth keyboards to control it. The one I'd recommend is the Logitech diNovo because it was meant for htpcs. Unfortunately, it going to cost around $100-$130.
I saw other kinds of keyboards, some had built-in touchpad, etc so ...

It is roughly around 8"x5" when I measured it.
The 72pin slot that comes with the Nes (with the tabs) is about 5.5"x1".

Sundriver is the best way to go because it can play both Wii and GC games from it.
BTW, it is cheaper here

Polycase.com is your best bet by the way you described it.
With their cases, you can either cut all the holes yourself or frankencase it. I recommend getting a ZN-40 or ZN-45 if it is your first time.

Got my Psone screen and leds to mod it. Actually, i got my screen awhile ago.
Do you really need the video amp for the RES?
And Im going to work on this over this week since i have off of school on thursday to monday.