Hook up

Includes Atari 2600, Nintendo 8-bit, Sega Master System, MSX and more!

Moderator: Moderators

Post Reply
Lost
Posts: 4
Joined: Sat Dec 31, 2005 3:30 pm

Hook up

Post by Lost »

I got the system powered up and the audio/video cables connected, but just get "blinking" on the screen -- no game video or audio. What is the RF plug on the back? Do I need to connect that to something? Any other tips to get it playing would be appreciated.
Thanks.
cowsgoquack101
Senior Member
Posts: 1981
Joined: Thu Aug 04, 2005 9:21 am
Steam ID: cowsgoquack101
Location: Cold, grey Indiana!

Post by cowsgoquack101 »

1. No you don't need to connect the RF signal if the video and audio are plugged in.

2. Have you tried blowing in the NES and the cart and or cleaning them out?
Trv
Posts: 344
Joined: Tue Mar 29, 2005 5:34 pm
Location: From Russia With Fun!

Post by Trv »

cowsgoquack101 wrote:2. Have you tried blowing in the NES and the cart and or cleaning them out?
Jeez, havent you read bens book? Blowing doesnt work, its a common misconception.
dead
gannon
Moderator
Posts: 6974
Joined: Sun Apr 04, 2004 4:48 pm
Location: Near that one big lake
Contact:

Post by gannon »

Actually, it does work, but it also oxidizes the connections which in the long run is bad.
cowsgoquack101
Senior Member
Posts: 1981
Joined: Thu Aug 04, 2005 9:21 am
Steam ID: cowsgoquack101
Location: Cold, grey Indiana!

Post by cowsgoquack101 »

We'll it's always worked for me. I have also used rubbing alcohol for the cartridges.
wallydawg
Senior Member
Posts: 2233
Joined: Mon Apr 05, 2004 11:28 am
Location: Sorry Illinois
Contact:

Post by wallydawg »

I cover the cart with my shirt and blow into it, it seems to work so that's good enough for me, whether it actually helps or not. :p
Image
atkafighter
Posts: 469
Joined: Sat Jun 18, 2005 9:16 pm

Post by atkafighter »

What do you mean by blinking? Is the console resetting over and over (blinking power led), or is it blinking on the tv?
EDIT: Hi USB. Haven't seen you around in a while.
Last edited by atkafighter on Tue Jan 03, 2006 12:24 am, edited 1 time in total.
usbcd36
Posts: 1293
Joined: Sun May 15, 2005 5:04 pm
Location: Inside Samus's arm cannon [gulp]___ Gender: Male

Post by usbcd36 »

It will do both. If the cartridge is not inserted correctly or the connector is dirty, the screen will flash a random color (though for me it's always been white) and the power LED will blink in sync with it. Try using a cloth and rubbing alcohol on the cart connector, then bending the pins up to make better contact. If it persists, try cleaning the cart as well.

Also, blowing has always worked for me since my carts are very dusty…
Post Reply