Crap on my screen.

If you're making a portable you probably need something to watch it on. (Unless you want to guess what's happening in the game, but I wouldn't advise that) Anyway, this forum is your "Hacking a pocket TV/screen" one-stop solution. Share your experiences and knowledge here.

Moderator: Moderators

Kurt_
Portablizer
Posts: 5748
Joined: Thu Nov 24, 2005 10:32 am
Steam ID: kurbert
Location: Ontario, Canada
Contact:

Crap on my screen.

Post by Kurt_ »

Got crap on my screen that won't come off.

Any suggestions?
Hey, sup?
daleighan
Posts: 671
Joined: Wed May 04, 2005 3:13 pm
Contact:

Post by daleighan »

toilet paper?
nos_slived
Higher Idiot
Posts: 3476
Joined: Mon Mar 21, 2005 6:32 pm
Location: Burnaby, BC, Canada
Contact:

Post by nos_slived »

If you have problems getting to a bathroom, you should use the floor or a box, not a screen.
Image
Kurt_
Portablizer
Posts: 5748
Joined: Thu Nov 24, 2005 10:32 am
Steam ID: kurbert
Location: Ontario, Canada
Contact:

Post by Kurt_ »

Very funny.

Any REAL suggestions?
Hey, sup?
G-force
Moderator
Posts: 3609
Joined: Mon Apr 19, 2004 1:43 pm
Location: Sweet home Indiana
Contact:

Post by G-force »

:lol:

Use Goo-Gone or Desolve-it. They can take off anything. Now this crap you Refer to, is it on the LCD itself or the screen protector? If it's on the LCD you might not want to use anything other than water.
nos_slived
Higher Idiot
Posts: 3476
Joined: Mon Mar 21, 2005 6:32 pm
Location: Burnaby, BC, Canada
Contact:

Post by nos_slived »

It would help if you gave us an idea of what it is. Is it paint? Dirt? Crap?
Image
*o*
Senior Member
Posts: 3765
Joined: Fri Apr 08, 2005 10:40 pm
Location: sydney, australia

Post by *o* »

lol try urinating on it?
Penn & Teller wrote:It's BULLS#%@
timmeh87
Senior Member
Posts: 3047
Joined: Mon Nov 14, 2005 10:19 pm
Location: Ontario, Canada

Post by timmeh87 »

maybe he means he has some artifacts or noise in the picture. who knows! he was so not specific!
Image

"Linux is only free if your time is worthless"
loup
Posts: 303
Joined: Mon May 23, 2005 4:13 pm

Post by loup »

for the last couple of steps of working with my screen and other parts I've just been using isopropyl alcohol. If it's sticky the alcohol will eat through it pretty easily. It can even eat through paint, but it will take a while of soaking it
From the OLD ozforces forums
- Offenders will be bashed. Repeat Offenders will be repeatedly bashed.
Kurt_
Portablizer
Posts: 5748
Joined: Thu Nov 24, 2005 10:32 am
Steam ID: kurbert
Location: Ontario, Canada
Contact:

Post by Kurt_ »

Well it seems everything I touch dies.

The crap isn't coming off.
I wiped the screen with acetone
How would I replace the glass infront of the LCD?
Is it even possible, or is it very hard.
Because I don't care enough to compromise the well-being of my screen.
Hey, sup?
Turbo Tax 1.0
Portablizer Extraordinaire
Posts: 4773
Joined: Wed Mar 30, 2005 6:19 pm
Location: Delaware, no sales tax
Contact:

Post by Turbo Tax 1.0 »

are you sure its not dead pixels or on the underside of your screen?
when life gives you lemons make flux
Image
snesp mk4
superdeformed
Portablizer Extraordinaire
Posts: 298
Joined: Thu Mar 03, 2005 4:45 pm

Post by superdeformed »

Kurt_ wrote:Well it seems everything I touch dies.

The crap isn't coming off.
I wiped the screen with acetone
How would I replace the glass infront of the LCD?
Is it even possible, or is it very hard.
Because I don't care enough to compromise the well-being of my screen.
Well if you used acetone on the screen, then you probably ruined it. What do you mean by the glass in front of the LCD? Is there a piece of glass protecting the LCD, or is it part of the actual LCD panel? If it's part of it, then you may want to start looking for a new screen.
Kurt_
Portablizer
Posts: 5748
Joined: Thu Nov 24, 2005 10:32 am
Steam ID: kurbert
Location: Ontario, Canada
Contact:

Post by Kurt_ »

I'm pretty sure it's a piece of glass covering it...1 second...

EDIT: The screen still works perfectly...

It might be the LCD, I'm not exactly sure...
It seems like theres a piece of glass on both sides of the LCD, so I'm assuming that it is a component of the LCD and cannot be removed.

If that's the case, I am NOT getting a new screen!

Would just adding more acetone to remove all of whatever is ontop of the glass work? I'm pretty sure its the anti glare coating. I could live with some glare.
Hey, sup?
G-force
Moderator
Posts: 3609
Joined: Mon Apr 19, 2004 1:43 pm
Location: Sweet home Indiana
Contact:

Post by G-force »

Don't use acetone! It can very easily eat away and destroy almost all kinds of plastics. Use Goo-Gone next time, it's a citrus cleaner and will not harm plastics. Alcohol works ok sometimes, but if it doesn't come off chances are Goo-Gone will work.

Now, I am reallly confused. You have a glass screen cover? On both sides of the LCD? :?
Most LCD's just have a clear plastic screen cover above the LCD itself. BTW, what screen do you have?
Kurt_
Portablizer
Posts: 5748
Joined: Thu Nov 24, 2005 10:32 am
Steam ID: kurbert
Location: Ontario, Canada
Contact:

Post by Kurt_ »

1) Goo-gone didn't work.

2) And I'm pretty sure I'm talking about the actual LCD.

3) It's an interact PS1 screen.


When I put any sort of liquid on it, the crap dissappears.

So i've narrowed it down to this:

1) Scratches that I can buff out.

2) Glare screen has been partially eaten away...It'll just look like a dirty screen, no big deal. It's only my first portable right? Get all the mistakes out now, so I won't make them on bigger projects.
Hey, sup?
Post Reply