How should I mount my LCD to the Ps2 itself?

[riva16]

Hey. I wana mount a PSone LCD to my PS2's clear blue case. The system stand up via vertical stand all the time, so below the PS2 logo (or where the logo would be if it was official case), above the heatsink inside, but high enough to clear the stand... How should I mount it? LCD panel on top, case in middle, and LCD controller underneath, all screwed together? OR... Cut hole in case, mount LCD panel AND controller as one, and save that much more room depth wise of screen poking out? the first idea is the best as easy to do, with small cut for LCD ribbon to clear inside... The secodn would look the best, but leaves easily to see the off, crooked, and horrible look of dremel cuts... Any easy ways to do the second idea, but cover up the LCD's sides? Also, heard ba dhtings about PS2 RGB protection? My DMS4 PRO is supposed to have PS2 color fix... Woudl this fix that prob? I swore I've had PS2 games run on the PSone LCD through RGB, or direct connectionw itht he AV OUT, default RGB, and work fine. Maybe just for DVD movies? Thanks,
Kyle

[everchangingone]

it depends on how big the screen is. it would depend on how integrated you want it to look. you could simply put some spacers under it and haver screws go through the case and spacers and hold the screen away from the case. also you have to take into account the power draw. the pstwo draws 5.2 or 5.3 amps. the power supply only puts out 5.65 amps. how are you going to power it? are you wanting to just use the small screen all the time or are you gonna want to hook it to a tv some time too? how you wire it depends on what you are gonna do with it. also are you trying to make this a portable? you said something about integrating the controller. it all depends on what you are doing.