mNESp questions

xriverfalconx · Post by **xriverfalconx** » Thu Oct 13, 2005 9:10 am

I am working on this for a buddy, but one thing I noticed is that this model is different from the one everyone else has been using. Can anyone point out what I am missing???

I turn it on and nothing comes up. The megajoy's cart slot had a stick in it...I'm assuming THAT is my rom? If so, can I just solder the pins onto the board and successfully start up?

Any help is greatly appreciated.

bioniclebert · Post by **bioniclebert** » Thu Oct 13, 2005 1:02 pm

Those pins are correct but thats (if I'm not mistaken) The super joy 2, not 3... I think I may have the Same thing lying around. Look at the other side of the board. are there pins above the cart port?

also try hookint it up to a TV and making shure you didnt wire the screen wrong.

G-force · Post by **G-force** » Thu Oct 13, 2005 1:09 pm

Better check the old power/controller/av board to see if everything matches up. Pinouts aren't meant to just be used blindly, just as a helpful guide. Always check the connections. Since you are having trouble, chances are it won't match. Check PoD to see if they have a pinout that matches your NOAC.

It looks like you don't have built in games since there is not a second glop on the board.

That's all I can reccomend. I hope it's not fried or anything.

Turbo Tax 1.0 · Post by **Turbo Tax 1.0** » Thu Oct 13, 2005 2:34 pm

thats the NOAC type i had with opne glop top yeay you need that little cart that was sticking out

xriverfalconx · Post by **xriverfalconx** » Thu Oct 13, 2005 9:37 pm

I purchased this one from Gannon, it's the megajoy 3. I'll try soldering the cart onto the board and see what happens there...or, i can solder the cart in and just make my portable with a nes slot. Hmm...we'll see what happens in the morning. Thanks my good people!!!