tazer

daguuy · Post by **daguuy** » Fri Aug 12, 2005 8:57 pm

sometimes i get mad at annoying people and want to zap them but i don't have a tazer, the closest thing i have to one is a disposable camera but it's a bit bulky to carry around as a tazer and dad would get mad at me for ruining a camera so i want to make one myself. how do you make something that zaps stuff with high voltage but low current? do you just get a battery and cap or what?

FDSMAN · Post by **FDSMAN** » Fri Aug 12, 2005 9:17 pm

http://www.afrotechmods.com/cheap/pikashoe/pikashoe.htm

daguuy · Post by **daguuy** » Fri Aug 12, 2005 9:19 pm

that's with a negative ion generator, i don't have any of those. is there a way to do it with caps, i have some laying around i can use

FDSMAN · Post by **FDSMAN** » Fri Aug 12, 2005 9:26 pm

there is an order page that carries that part, why can't you order it this would be so cool and consealable

daguuy · Post by **daguuy** » Fri Aug 12, 2005 9:39 pm

i prefer to use what i have so it's completely free and i don't have to wait for shipping

pezman · Post by **pezman** » Fri Aug 12, 2005 9:45 pm

i took apart a disposable with the cap charged and that electricution may have been as strong or stronger then the two times i got zaped w/120 ac. its really dangerous to make this(for you and the targets). but it would consist of little more then putting wires on the cap leads. i do not recomend. you could end up hurting someone w/burns or if the current went through the heart. dont do it. anyways moding a tazer case would be way cooler.

daguuy · Post by **daguuy** » Fri Aug 12, 2005 9:59 pm

i've touched the contacts that zap me on a cam and it didn't burn, just zap. i don't think it would be dangerous if the current's really low

pezman · Post by **pezman** » Fri Aug 12, 2005 10:05 pm

if you kept your finger on it it could burn you easily cause i remember it took quite a matter of seconds to discharge that puppy.
ps: dont keep your finger on it, and DO NOT use the tounge multimeter!!

daguuy · Post by **daguuy** » Fri Aug 12, 2005 10:15 pm

would this diagram work?

usbcd36 · Post by **usbcd36** » Fri Aug 12, 2005 10:30 pm

If you're REALLY bent on making a taser, get a disposable cam, then when you're done taking pictures, open it up and take out the film (it will be all rolled up back in the canister). You now have your stuff, use it wisely (basically, don't use it at all). There is a better thing to do with it, though, use the button to charge the flash, then whack the camera really hard on the side of your wrist/knee/any hard part of your body without many nerves. For some reason, this will make the cap discharge and the camera will flash. Do that to someone instead of shocking them, the effect is similar, the danger, a bare minimum.

Note: don't try this with a camera loaded with film, it shifts the position of the film and your pictures become crappy.

shmagoogin77 · Post by **shmagoogin77** » Fri Aug 12, 2005 10:56 pm

daguuy wrote:would this diagram work?

what is a cap?

pezman · Post by **pezman** » Fri Aug 12, 2005 11:00 pm

capacitor

sam fisher · Post by **sam fisher** » Sat Aug 13, 2005 5:47 am

you wanna be careful of giving someone brain damage. Im one of those kids with a medical dad who knows all the dangerous things

daguuy · Post by **daguuy** » Sat Aug 13, 2005 7:32 am

oh well i guess i'll have to wait tilll i know about this stuff before i make one

Post by **SpongeBuell** » Sat Aug 13, 2005 9:48 am

sam fisher wrote:you wanna be careful of giving someone brain damage. Im one of those kids with a medical dad who knows all the dangerous things

You're also an extreme hypochondriac, Sam