VGA and 2.6" LCD needed

[PRThomas]

I need an s-video to VGA converter and 2.6" LCD screen. I don't wish to pay a lot.

[gamax92]

VGA Video connector pinouts:
Pin # - Signal Name - CAT 5 Conductor
1 - Red - Orange
2 - Green - Green
3 - Blue - Blue
4 - No Connection
5 - Ground - No Connection
6 - Ground - Orange/White
7 - Ground - Green/White
8 - Ground - Blue/White
9 - No Connection
10 - Ground - No Connection -
11 - No Connect
12 - DDC DAT - No Connection
13 - Horizontal Synchronization - Brown
14 - Vertical Synchronization - Brown White
15 - DDC Clock - No Connection
-----------------------------------------------------------------------------
Can I use these techniques to build a long S-Video Cable?

Sure. you just need some connectors like these: S-Video Connectors

Use one pair of the CAT5 for Y and the other for C. Here are the pin
outs:

Pin 1 = Y gnd (Use Green/White)
Pin 2 = C gnd (Use Orange/White)
Pin 3 = Y (Use Green)
Pin 4 = C (Use Orange)

Blue & Blue/White, Brown & Brown/White are not used These unused pairs could be used for left and right audio or possibly coaxial digital audio by attaching more RCA connectors.