Gameboy Mods for a Beginner! Please Help ? :D

[ThatWeeScottishChiel]

Hey Guys and Gals.

New to the Forums and Modding/Hacking.

I have quite a few questions seeing as I am new to this If you don't mind answering.
These are all for a case mod I am doing.

1. On the circuit board on the places where you press the buttons There are some brown pressy bits. How would I remove these? With a stanley knife?

2. Underneath the brown pressy button bits I am lead to believe there are three metal contact points. I would like to solder a separate tackswitch and microswitch to the button. Which contact points out of the three do i solder to?

3. Is it possible to remove the sliding power switch and solder a separate one to it? If so how?

4. Is it possible to solder wires from the SP speaker contacts to the circuit board contacts where it would normally touch?

I would really appreciate it if you would respond!

Thanks

[ninja_ gayyden1024]

Welcome to the forums! Also I need to know what kind of gameboy you are using and what exactly you want to do. (be more clear in what you are trying to stay.)

[ThatWeeScottishChiel]

Welcome to the forums! Also I need to know what kind of gameboy you are using and what exactly you want to do. (be more clear in what you are trying to stay.)

Hey. I'm wanting to case mod a Gameboy Advance SP by turning it into a mini Arcade Machine.

http://www.youtube.com/watch?v=GYtrESnnR08" onclick="window.open(this.href);return false;
http://www.youtube.com/watch?v=F-XXcI0euAw" onclick="window.open(this.href);return false;
http://www.youtube.com/watch?v=pF_odNeQOZ8" onclick="window.open(this.href);return false;

If you watch these you may get a better idea of what Im on about.

Thanks for the reply