Ok I'm looking around on Classicgaming.com/vcsp for info on making the atari output composite. The problem I've run into is well using the info I'm unsure as to what type of 22-ohm resistor I should get (1/2 watt or 1/4 watt), and about the potentiometer I cant find a 1-k (they have 50K-100K though)
If anyone can help clear this up great, I'm hoping to have everything set up when my system arrives.
Parts list (clearification)
Moderator: Moderators
Parts list (clearification)
vskid wrote:Nerd = likes school, does all their homework, dies if they don't get 100% on every assignment
Geek = likes technology, dies if the power goes out and his UPS dies too
I am a geek.
From Digikey I used part U262R102B-ND (Pot's) and part OD220J-ND (Resistors). They worked perfectly, though unfortunatly I bought the wrong +5 volt regulator. I fryed mine. 
Make sure your 7805 can handle the amps on your battery! But anyway the parts worked. (By the way it dosn't matter if you use 1/2 or 1/4 watt resistors, but usually 1/4 watt are cheaper so buy them.)
Make sure your 7805 can handle the amps on your battery! But anyway the parts worked. (By the way it dosn't matter if you use 1/2 or 1/4 watt resistors, but usually 1/4 watt are cheaper so buy them.)