Nintendo 64 Motherboard.

[ishowernaked]

allright guys, this is my first topic, i am new here. I had a quick question. Working on my first N64 mod, and i needed to know the dimensions of the motherboard before i bought an enclosure. Any answers appreciated, correct answers needed.

[bassmasta]

That depends. You can chop it down quite a bit (a la x64 lite) if you really want to. But I wouldn't suggest it for your first mod.
A good commonly used starting enclosure is a ZN-45, which is 9.18 x 5.25 inches.

[vskid]

http://forums.benheck.com/viewtopic.php?f=40&t=31037" onclick="window.open(this.href);return false;

[ishowernaked]

thanks, this helps a lot

[MarioOwnsAll]

The n64 motherboard is 12.75cm by 16.00cm (minus the extra length the ports add which won't be there when you put the system together. You can cut the motherboard down to about half of that size if you have experience with n64ps and if you have decent solder skill (I wouldn't recommend resizing the mother board too much if this is your first portable)