What would be dead if the expansion pack goes in backwards?

limpport · Post by **limpport** » Sun Nov 01, 2009 5:44 pm

Yep. I did it. Now my N64 will not turn, no matter what game I try. Is the N64 dead, the expansion pack, or both?

hailrazer · Post by **hailrazer** » Sun Nov 01, 2009 6:08 pm

Unplug the power supply and then plug it in and try it tomorrow.

spinout · Post by **spinout** » Sun Nov 01, 2009 7:39 pm

You only have to wait a few hours for the PSU to reset, at least from my experience.

hailrazer · Post by **hailrazer** » Sun Nov 01, 2009 7:42 pm

spinout wrote:You only have to wait a few hours for the PSU to reset, at least from my experience.

Sometimes you have to wait over 24 hours. I know this for a fact

limpport · Post by **limpport** » Mon Nov 02, 2009 1:25 am

It has sat for over 48 hours and it's running off of a 7.5v PSone power cord

I have tried it with a 12v plug as well, but no luck...

smitty · Post by **smitty** » Mon Nov 02, 2009 9:33 am

Try using a Jumper Pak, or a different Expansion Pak.

vskid · Post by **vskid** » Mon Nov 02, 2009 9:37 am

http://forums.benheck.com/viewtopic.php?f=5&t=11511" onclick="window.open(this.href);return false;
Try number 3?

timmeh87 · Post by **timmeh87** » Mon Nov 02, 2009 1:31 pm

Putting it in backwards shorts 3.3v to ground. Whatever you are getting 3.3v from is probably blown.

benheck.com Forums