Parts for building an audio amp.

Do you have a technical question that doesn't really fit a specific console? Want some general info on electronics, hacking, making cookies, etc? Here's the place to ask! Go nuts.

Moderator: Moderators

Post Reply
Loc
Posts: 28
Joined: Mon Mar 23, 2009 8:26 pm

Parts for building an audio amp.

Post by Loc »

I was doing a little searching and the audio amp in this topic looks like a good one to use.

So I'm looking for parts on Mouser and searching for capacitors.

http://www.mouser.com/Search/Refine.asp ... uf&FS=True" onclick="window.open(this.href);return false;

My question is, how do I know which capacitor to get? There's so many different types for the same uf rating.
nitro2k01
Posts: 651
Joined: Tue Dec 19, 2006 12:41 pm

Re: Parts for building an audio amp.

Post by nitro2k01 »

This one should do for C3 and C4. In fact, you could even replace C1 with the same type. (Yes I know they're different values, but it will work.)
http://www.mouser.com/Search/ProductDet ... 2CKNneY%3d

This one for C2, 220 uF
http://www.mouser.com/Search/ProductDet ... BKq75bQ%3d" onclick="window.open(this.href);return false;

Rhis one should work for C5, 1 uF
http://www.mouser.com/Search/ProductDet ... yaNfVcs%3d" onclick="window.open(this.href);return false;
It might be a snug fit since that one is axial (The leads are on two sides) and the kit board is probably designed for a radial capacitor. Of course this matters less if you're making the amp on a veroboard.
Actually you could replace C5 with two 470 nF type (connected in parallell) or even just one of that type. Also, if you choose the 1 uF capacitor for C5, be aware that it is polarized and should be connected with its negative lead to ground.
Also, I might be mistaken, but I believe C5 would be more useful if its other lead was connected to the point where IC pin 2,8 and the middle pin of the potentiometer join.
My blog
ASM Retro <- Gameboy Classic Backlight

Being the sadistic bastard I am, I have covered Frog's left eye with a Santa hat.

Last edited by nitro2k01 tomorrow, 1:48 pm; edited 1 time in total
Loc
Posts: 28
Joined: Mon Mar 23, 2009 8:26 pm

Re: Parts for building an audio amp.

Post by Loc »

Wow, thanks a lot for the help man! How do you know which capacitors would be good to use?

Hmm, that first capacitor is pretty expensive. Is there a cheaper alternative?
nitro2k01
Posts: 651
Joined: Tue Dec 19, 2006 12:41 pm

Re: Parts for building an audio amp.

Post by nitro2k01 »

My blog
ASM Retro <- Gameboy Classic Backlight

Being the sadistic bastard I am, I have covered Frog's left eye with a Santa hat.

Last edited by nitro2k01 tomorrow, 1:48 pm; edited 1 time in total
bacteria
Portablizer Extraordinaire
Posts: 3984
Joined: Fri Apr 20, 2007 12:14 am
Location: Hampshire, UK
Contact:

Re: Parts for building an audio amp.

Post by bacteria »

In USA Gift-Cards (at least the ones I was sold) you have a tiny audio amp which works quite well. The board as I recall is about 2cms long or thereabouts. Another good source is small MP3 players. Might save you money and trouble??
Image
Loc
Posts: 28
Joined: Mon Mar 23, 2009 8:26 pm

Re: Parts for building an audio amp.

Post by Loc »

lol, that's a good idea. I'm guessing most gift cards are probably mono though, and don't have a potentiometer.
scttyb69
Posts: 9
Joined: Sat Aug 01, 2009 1:03 pm

Re: Parts for building an audio amp.

Post by scttyb69 »

Sorry to bump an old topic, but i have a bazooka BA1500 amp motherboard with *most* the components still on it.

I could sell it to you as-is.
Post Reply