I have a lot of snes parts lying around that I want to get rid of.
1 snes controller ports
2 eject bottons
1 set of power/reset buttons with the plastic thing that holds them in place.
The things that go around the cartridge flap. Not the flap itself. The front piece says "Super Nintendo Entertainment system" on it.
Then I have the main board of a GBO. I broke the front board with the screen and buttons, and have no use for the main board.
I also have a screen from a GBC
I also have lots of IDE cable if anybody wants some.
If there is anything you want, make an offer.
EDIT: I also have the circuit board of a retro duo controller. I might be willing to part with an unopened third party controller or two too.
EDIT: i can also part with a dreamcast modem ( just the guts, no case) and a semi-working snes. It turns on and plays games, but freezes at menus and on mario world it lets you play, but after you beat a level, the game locks up. This is just a loose board. No adapter plug.
WTS snes/GBO parts.
Moderator: Moderators
-
themadhacker
- Senior Member
- Posts: 2670
- Joined: Wed Aug 06, 2008 7:53 pm
- Location: ohio
WTS snes/GBO parts.
Last edited by themadhacker on Tue Apr 14, 2009 5:04 pm, edited 2 times in total.
rest in peace, Ronnie James Dio! \m/
-
palmertech
- Senior Member
- Posts: 3225
- Joined: Sat Feb 02, 2008 1:40 am
- Location: California, land of the homeless and hippies
Re: WTS snes/GBO parts.
How much is the front board on that GBO broken? Is the screen/ribbon intact?

Excellent
-
themadhacker
- Senior Member
- Posts: 2670
- Joined: Wed Aug 06, 2008 7:53 pm
- Location: ohio
Re: WTS snes/GBO parts.
I shattered the LCD while peeling of the metel backing on it. Let's just say that it is a failed backlight project. In an anger, I ripped the ribbon off. So, to answer your question, no, they are not in tact.
rest in peace, Ronnie James Dio! \m/