PSONE SCREEN TRIMMING

b_ski30 · Post by **b_ski30** » Sat Apr 16, 2005 1:04 am

OK, I got a psone screen, but i quickly found it is just fractions of an inch from fitting in my case, so...

Can i cut the right side of the board (as looking at the screen itself) closer to the mounting holes? It seems to be unused board area???

Also, what should i use to cut that best?

Thanks in advance,
Kyle

nos_slived · Post by **nos_slived** » Sat Apr 16, 2005 1:14 am

You can chop off any unused part of the board. The best way of doing this is to skor the board using an ex-acto knife, then when you get it most of the way down, you can just snap it off.

Post by **Gamelver** » Sat Apr 16, 2005 7:07 am

check out this thread soon to see how you can make your psone screen as small as possible

....(there are already some pics up so you can get an idea of what I shaved off

)

nos_slived · Post by **nos_slived** » Sat Apr 16, 2005 12:35 pm

Forgot to link to your thread, sorry Gamelver.

B_ski: Go to that thread immediatly, and praise Gamelver for posting it. All hail Gamelver! (and gannon, HK-47, Ben, Blacksix, SPONGEY and all other helping members)

Post by **Black Six** » Sat Apr 16, 2005 6:01 pm

Closed.