What to do with a Mini-itx board?

Want to just shoot the breeze? Forum 42 is the place!

Moderator: Moderators

Squalid
Posts: 140
Joined: Wed Nov 30, 2005 2:04 pm
360 GamerTag: squalid9
Location: UK
Contact:

What to do with a Mini-itx board?

Post by Squalid »

Hey chaps,

I've got a mini-itx board (17cm x 17cm) stuck in a sega saturn project i did years ago and i feel like starting a new project.

Tried putting it into my old Spectrum ZX but its just slightly too big :(

Anyone got any ideas on what i can do with this board? I've got the usual ideas of putting it into a megadrive / master system / other console.

Edit: Thought about putting it into a Wii case, but just found out that the Wii case is ~2cm too small :(
eagle5953
Moderator
Posts: 1892
Joined: Mon Jul 07, 2008 5:06 pm
360 GamerTag: eagle5953
Steam ID: eagle5953
Contact:

Re: What to do with a Mini-itx board?

Post by eagle5953 »

You could put it in an NES case - lots of people have done that, however. If you need some inspiration, check out http://www.mini-itx.com. They have lots of completed projects displayed.

I'm making a small PC strictly for my TV - should be able to handle N64 and earlier. I'm making my own case for it.
Sparkfist
Forum Administrator
Posts: 6754
Joined: Tue Apr 20, 2004 7:12 am
Location: Michigan

Re: What to do with a Mini-itx board?

Post by Sparkfist »

Well I thought seeing a Mini-Itx in an Atari 2600, was pretty cool. In the mod I saw, they even gutted a cartridge and put an optical mouse in it. It would be a pretty easy Atari 2600 shells are dirt cheap, and you could use a Combat cartridge for the mouse mod.

If you want the ability to use CD/DVD-ROM There was a C64 on Mini-Itx.com that had a optical drive, and was pretty cool. Check it out.

-Sparkfist
vskid wrote:Nerd = likes school, does all their homework, dies if they don't get 100% on every assignment
Geek = likes technology, dies if the power goes out and his UPS dies too

I am a geek.
Squalid
Posts: 140
Joined: Wed Nov 30, 2005 2:04 pm
360 GamerTag: squalid9
Location: UK
Contact:

Re: What to do with a Mini-itx board?

Post by Squalid »

Been checking mini-itx.com projects for years, thats where i got my sega saturn idea from.

Done a NES PC with a friend :)

The Atari idea sounds cool, I've got a (think) faulty Atari 2600 somewhere that could look cool with or without CD-rom!
eagle5953
Moderator
Posts: 1892
Joined: Mon Jul 07, 2008 5:06 pm
360 GamerTag: eagle5953
Steam ID: eagle5953
Contact:

Re: What to do with a Mini-itx board?

Post by eagle5953 »

Squalid wrote:Been checking mini-itx.com projects for years, thats where i got my sega saturn idea from.

Done a NES PC with a friend :)

The Atari idea sounds cool, I've got a (think) faulty Atari 2600 somewhere that could look cool with or without CD-rom!
Any links to your NES PC? Did you cut the bottom out of the NES to get that extra half-inch?
Squalid
Posts: 140
Joined: Wed Nov 30, 2005 2:04 pm
360 GamerTag: squalid9
Location: UK
Contact:

Re: What to do with a Mini-itx board?

Post by Squalid »

eagle5953 wrote: Any links to your NES PC? Did you cut the bottom out of the NES to get that extra half-inch?
No, didn't post anything online. Done it about 3 or 4 years ago.

Yeah, we cut that T-strip out and covered the hole in (Can't seem to remember what with tho lol)

Actually, it was searching for NES PC info, that i came across Benheck :) Horray for NESPC's!
eagle5953
Moderator
Posts: 1892
Joined: Mon Jul 07, 2008 5:06 pm
360 GamerTag: eagle5953
Steam ID: eagle5953
Contact:

Re: What to do with a Mini-itx board?

Post by eagle5953 »

I also didn't post any pictures of the one I did with a buddy. I hadn't taken many pictures of the build process, anyway. We managed to cram ours together without cutting the bottom out, but it definitely was a tight fit.
Squalid
Posts: 140
Joined: Wed Nov 30, 2005 2:04 pm
360 GamerTag: squalid9
Location: UK
Contact:

Re: What to do with a Mini-itx board?

Post by Squalid »

eagle5953 wrote:I also didn't post any pictures of the one I did with a buddy. I hadn't taken many pictures of the build process, anyway. We managed to cram ours together without cutting the bottom out, but it definitely was a tight fit.
I'm not sure what happened to our NES PC, i havent seen it since me and my friend lived together all those years ago.

He's about to move into my new place, so if I find it, i'll take pictures! :)

Now, does anything think it would be possible to use any of the switches on the 2600 to start/reset the PC? :)
nevermind1534
Senior Member
Posts: 1977
Joined: Fri Feb 06, 2009 1:36 pm
Steam ID: nevermind1534
Location: Detroit, MI
Contact:

Re: What to do with a Mini-itx board?

Post by nevermind1534 »

I am working on an NES PC, and I did not trim that half-inch of plastic on the bottom. http://www.thebestcasescenario.com/foru ... hp?t=14999
Kyo wrote:"does anyone here know how to fly a plane?"

"STAND BACK EVERYBODY, I HAVE A FAKE ID"
eagle5953
Moderator
Posts: 1892
Joined: Mon Jul 07, 2008 5:06 pm
360 GamerTag: eagle5953
Steam ID: eagle5953
Contact:

Re: What to do with a Mini-itx board?

Post by eagle5953 »

nevermind1534 wrote:I am working on an NES PC, and I did not trim that half-inch of plastic on the bottom. http://www.thebestcasescenario.com/foru ... hp?t=14999
That looks pretty sweet! If I remember when I get home, I'll see if I can find some pics.
Triton
Moderator
Posts: 7398
Joined: Mon May 24, 2004 12:33 pm
360 GamerTag: triton199
Steam ID: triton199
Location: Iowa
Contact:

Re: What to do with a Mini-itx board?

Post by Triton »

you should give me the mini itx board so i can build a carPC :lol:
eagle5953
Moderator
Posts: 1892
Joined: Mon Jul 07, 2008 5:06 pm
360 GamerTag: eagle5953
Steam ID: eagle5953
Contact:

Re: What to do with a Mini-itx board?

Post by eagle5953 »

Triton wrote:you should give me the mini itx board so i can build a carPC :lol:
The sweetest carPC I've heard of was a guy who set his up with WiFi and programmed it to sync his music automatically with his home PC.
Kurt_
Portablizer
Posts: 5748
Joined: Thu Nov 24, 2005 10:32 am
Steam ID: kurbert
Location: Ontario, Canada
Contact:

Re: What to do with a Mini-itx board?

Post by Kurt_ »

Sell it and buy a mobile-itx?

http://en.wikipedia.org/wiki/Mobile-ITX
Hey, sup?
tom61
Senior Member
Posts: 1517
Joined: Fri Mar 25, 2005 6:51 pm

Re: What to do with a Mini-itx board?

Post by tom61 »

eagle5953 wrote:
Triton wrote:you should give me the mini itx board so i can build a carPC :lol:
The sweetest carPC I've heard of was a guy who set his up with WiFi and programmed it to sync his music automatically with his home PC.
That's the best you've seen? I've seen one capable of streaming his cable TV from home, setting recordings, time shifting, and streaming video and music over a cellular connection to an in-dash MythTV frontend PC.
lifeisbetterwithketchup
Senior Member
Posts: 2180
Joined: Fri Jul 21, 2006 12:08 pm
Steam ID: lifeisbetterwithketchup
Location: Illinois. Whee.

Re: What to do with a Mini-itx board?

Post by lifeisbetterwithketchup »

tom61 wrote:
eagle5953 wrote:
Triton wrote:you should give me the mini itx board so i can build a carPC :lol:
The sweetest carPC I've heard of was a guy who set his up with WiFi and programmed it to sync his music automatically with his home PC.
That's the best you've seen? I've seen one capable of streaming his cable TV from home, setting recordings, time shifting, and streaming video and music over a cellular connection to an in-dash MythTV frontend PC.
Image
Rekarp wrote:
mako321 wrote:What makes you head ninja, anyways? :wink:
Cause I am Abe F#!@ing Lincoln. :mrgreen:
Post Reply