ps1 disc drive question

Includes but not limited to: SNES, Genesis, Sega CD, PlayStation 1, Nintendo 64, Dreamcast, Game Gear and I guess the Virtual Boy.

Moderator: Moderators

Post Reply
samjc3
Posts: 1086
Joined: Sun Feb 15, 2009 8:05 pm
Steam ID: samjc3
Location: burning and pillaging!!

ps1 disc drive question

Post by samjc3 »

hi.
does anyone have the pinout for the disc drive of the small ps1? i am looking to replace the drive with a flashcard reader to save space in my portable.
thanks, sam
AfroLH wrote:
HotDog-Cart wrote: Also, the codename stuff adds a little bit of sexyness, in my eyes.
Yeah well Alcohol adds a little bit of sexyness in my eyes, but I dont drink it all the time. :wink:
SpongeBuell wrote:As proof, I offer this picture of a monkey on my head.
jleemero
Posts: 804
Joined: Mon Feb 19, 2007 3:12 pm
Location: Yay Desert.

Re: ps1 disc drive question

Post by jleemero »

Good luck with that.
themadhacker
Senior Member
Posts: 2670
Joined: Wed Aug 06, 2008 7:53 pm
Location: ohio

Re: ps1 disc drive question

Post by themadhacker »

Yeah, I think this is going to be a little (lot) over your head, especially for a first ( I'm assuming first) project.
rest in peace, Ronnie James Dio! \m/
samjc3
Posts: 1086
Joined: Sun Feb 15, 2009 8:05 pm
Steam ID: samjc3
Location: burning and pillaging!!

Re: ps1 disc drive question

Post by samjc3 »

yeah, maybe. this is my first project. i also have a ps2 and original xbox that i am willing to mod. any suggestions there?
AfroLH wrote:
HotDog-Cart wrote: Also, the codename stuff adds a little bit of sexyness, in my eyes.
Yeah well Alcohol adds a little bit of sexyness in my eyes, but I dont drink it all the time. :wink:
SpongeBuell wrote:As proof, I offer this picture of a monkey on my head.
bacteria
Portablizer Extraordinaire
Posts: 3984
Joined: Fri Apr 20, 2007 12:14 am
Location: Hampshire, UK
Contact:

Re: ps1 disc drive question

Post by bacteria »

I don't think it is possible, but if it were, it would be excellent indeed. The CD drive is tall, about 21mm tall; so prohibits a PSone portable being slim.
Image
goodie
Posts: 824
Joined: Mon Oct 11, 2004 1:02 pm

Re: ps1 disc drive question

Post by goodie »

If the PSone used a standard IDE or SCSI interface, replacing it with a flash drive would probably be a piece of cake. However, it most likely uses some propietery interface.
mnbvcxzlkjhgfdsapoiuytrewq
samjc3
Posts: 1086
Joined: Sun Feb 15, 2009 8:05 pm
Steam ID: samjc3
Location: burning and pillaging!!

Re: ps1 disc drive question

Post by samjc3 »

unfortunantly, the datasheet for the disc drive doesnt seem to exist. the part number for mine is "ksm 440bam" but there are also drives with the part numbers "ksm 440" acm, adm, and aem. judging on what ive found they are interchangeable. also i did get the specsheet for the psone. it might be in there. im looking through it now
AfroLH wrote:
HotDog-Cart wrote: Also, the codename stuff adds a little bit of sexyness, in my eyes.
Yeah well Alcohol adds a little bit of sexyness in my eyes, but I dont drink it all the time. :wink:
SpongeBuell wrote:As proof, I offer this picture of a monkey on my head.
samjc3
Posts: 1086
Joined: Sun Feb 15, 2009 8:05 pm
Steam ID: samjc3
Location: burning and pillaging!!

Re: ps1 disc drive question

Post by samjc3 »

i think i found the pinout, however, its for the old playstation scph 7500, not the psone scph 101, however, it lists the optical device as the ksm 440 aem, which is a psone part. the pinout/map thing is on page 7
[url]http://www.eserviceinfo.com/download.ph ... =18807/url]
AfroLH wrote:
HotDog-Cart wrote: Also, the codename stuff adds a little bit of sexyness, in my eyes.
Yeah well Alcohol adds a little bit of sexyness in my eyes, but I dont drink it all the time. :wink:
SpongeBuell wrote:As proof, I offer this picture of a monkey on my head.
palmertech
Senior Member
Posts: 3225
Joined: Sat Feb 02, 2008 1:40 am
Location: California, land of the homeless and hippies

Re: ps1 disc drive question

Post by palmertech »

This is impossible on many levels, the first of which is that the PSone checks to make sure it has a legit drive (Of the main reasons you don't see replacement that are new).

Unless you have a LOT of experience reverse engineering proprietary interfaces, and a couple hundred hours of time, not to mention the proper FPGA programming knowledge/expensive hardware, just use the CD drive.

If you want a flashcard interface, use a PSP with custom firmware, a component to RGB converter, and an RGB screen.
Image

Excellent
64M320N3
Posts: 790
Joined: Wed Apr 16, 2008 5:27 pm
Location: Ft. Collins

Re: ps1 disc drive question

Post by 64M320N3 »

Even with that, palmertech, i think he wouldn't be able to do that. If he had a whole team, maybe...
I laughed when i first started reading this because it's impossible for an everyday modder and still improbable for the elite programmers out there.
Let me just say you can't.
Making stuff with my new beautiful CNC machine!
Would you like a professional looking custom case for your portable? I may be able to help you. Check out this link:
http://forums.benheck.com/viewtopic.php?f=13&t=32724
XCVG
Senior Member
Posts: 1947
Joined: Sun Dec 21, 2008 9:10 pm
Location: Canada

Re: ps1 disc drive question

Post by XCVG »

I could hook up a flashcard reader! It just wouldn't work, that's all. :lol:
64M320N3
Posts: 790
Joined: Wed Apr 16, 2008 5:27 pm
Location: Ft. Collins

Re: ps1 disc drive question

Post by 64M320N3 »

:lol: Ya, i don't think you're helping (yet again, neither am I)
Making stuff with my new beautiful CNC machine!
Would you like a professional looking custom case for your portable? I may be able to help you. Check out this link:
http://forums.benheck.com/viewtopic.php?f=13&t=32724
Post Reply