Joystick mod
Moderator: Moderators
-
thewise1
- Portablizer Extraordinaire
- Posts: 1413
- Joined: Sun Jan 04, 2009 8:18 pm
- Location: Sitting on my pile of authentic minnesota dirt
Joystick mod
So does any 3rd party controller work with changing the joystick or are there only certain kinds?
(I plan to replace the n64 one with a ps2 joystick)
I really want it to work with a madcatz controller
(I plan to replace the n64 one with a ps2 joystick)
I really want it to work with a madcatz controller
-
palmertech
- Senior Member
- Posts: 3225
- Joined: Sat Feb 02, 2008 1:40 am
- Location: California, land of the homeless and hippies
Re: Joystick mod
The vast majority work, but a few still use the opto-sensors (Or worse, a hall effect mechanism).
If it LOOKS like an official one, be careful, as they are a lot more likely to use the same kind of joystick. If it is clearly different, it is almost 100% certainly one that will work with a PS2 joystick.
If it LOOKS like an official one, be careful, as they are a lot more likely to use the same kind of joystick. If it is clearly different, it is almost 100% certainly one that will work with a PS2 joystick.

Excellent
-
thewise1
- Portablizer Extraordinaire
- Posts: 1413
- Joined: Sun Jan 04, 2009 8:18 pm
- Location: Sitting on my pile of authentic minnesota dirt
Re: Joystick mod
Thanks palmertech, I just have one question, what's a hall-effect mechanism. Sounds terriblepalmertech wrote:The vast majority work, but a few still use the opto-sensors (Or worse, a hall effect mechanism).
If it LOOKS like an official one, be careful, as they are a lot more likely to use the same kind of joystick. If it is clearly different, it is almost 100% certainly one that will work with a PS2 joystick.
-
palmertech
- Senior Member
- Posts: 3225
- Joined: Sat Feb 02, 2008 1:40 am
- Location: California, land of the homeless and hippies
Re: Joystick mod
In reality, it is extremely awesome.
It experiances very little wear, and is very reliable and accurate, and it is almost impossible for it to become de-tuned. It basically uses magnetic field detection. The Dreamcast controller uses this method.
The main reason it is terrible to us is that hacking one is near impossible.
Try looking for a "Yobo" brand N64 controller, they have a lot of tolerance, are easy to solder to, and most importantly, are the most widely available/cheap controllers that will work. If you can get a random better deal, though, take it.
The main reason it is terrible to us is that hacking one is near impossible.
Try looking for a "Yobo" brand N64 controller, they have a lot of tolerance, are easy to solder to, and most importantly, are the most widely available/cheap controllers that will work. If you can get a random better deal, though, take it.

Excellent
Re: Joystick mod
I dunno, my Yobo analog stick broke on me (looks fine, doesn't register side to side movements)
I tried to replace the stick with an xbox one but the same thing happened. I have no idea what is wrong (it worked before...) in short, they are pieces of crap.
I tried to replace the stick with an xbox one but the same thing happened. I have no idea what is wrong (it worked before...) in short, they are pieces of crap.
Making stuff with my new beautiful CNC machine!
Would you like a professional looking custom case for your portable? I may be able to help you. Check out this link:
http://forums.benheck.com/viewtopic.php?f=13&t=32724
Would you like a professional looking custom case for your portable? I may be able to help you. Check out this link:
http://forums.benheck.com/viewtopic.php?f=13&t=32724
-
palmertech
- Senior Member
- Posts: 3225
- Joined: Sat Feb 02, 2008 1:40 am
- Location: California, land of the homeless and hippies
Re: Joystick mod
I had that problem, too. I thought it was screwed, but I figured it out by poking at it with some wires and my multimeter, but I cannot for the life of me remember what it was I did...
I will check for you, if it is still in one piece.
And pieces of crap they may be, but rather a cheap piece of crap than an expensive piece of gold (At least for what we are doing).
I will check for you, if it is still in one piece.
And pieces of crap they may be, but rather a cheap piece of crap than an expensive piece of gold (At least for what we are doing).

Excellent
Re: Joystick mod
Ya, now that you put it that way, they're okay... i still prefer the official ones, probably because the sticks are more accurate, although they do wear out easily.
Please post about how you fixed it because then perhaps i may use it again.
Regarding the original thread, the madcatz controller will work. At least i'm pretty sure it will (perhaps post a picture of the one you want to use, otherwise i cannot specifically recall.)
Please post about how you fixed it because then perhaps i may use it again.
Regarding the original thread, the madcatz controller will work. At least i'm pretty sure it will (perhaps post a picture of the one you want to use, otherwise i cannot specifically recall.)
Making stuff with my new beautiful CNC machine!
Would you like a professional looking custom case for your portable? I may be able to help you. Check out this link:
http://forums.benheck.com/viewtopic.php?f=13&t=32724
Would you like a professional looking custom case for your portable? I may be able to help you. Check out this link:
http://forums.benheck.com/viewtopic.php?f=13&t=32724
-
palmertech
- Senior Member
- Posts: 3225
- Joined: Sat Feb 02, 2008 1:40 am
- Location: California, land of the homeless and hippies
Re: Joystick mod
http://cgi.ebay.com/NO-RESERVE-BRAND-NE ... 1|294%3A50
That one will work 100%.
Nice small board, too.
That one will work 100%.
Nice small board, too.

Excellent
Re: Joystick mod
Yep, it has simpler tech... the joystick that it uses are much easier to work with.thewise1 wrote:Smaller than the official n64 board?
There are ones with incredibly small boards, though- check the Darth 64 thread, that one is TINY
Making stuff with my new beautiful CNC machine!
Would you like a professional looking custom case for your portable? I may be able to help you. Check out this link:
http://forums.benheck.com/viewtopic.php?f=13&t=32724
Would you like a professional looking custom case for your portable? I may be able to help you. Check out this link:
http://forums.benheck.com/viewtopic.php?f=13&t=32724
-
thewise1
- Portablizer Extraordinaire
- Posts: 1413
- Joined: Sun Jan 04, 2009 8:18 pm
- Location: Sitting on my pile of authentic minnesota dirt
Re: Joystick mod
Yeah I've seen the hori minipad, $50 though, way to pricey for a controller.64M320N3 wrote:Yep, it has simpler tech... the joystick that it uses are much easier to work with.thewise1 wrote:Smaller than the official n64 board?
There are ones with incredibly small boards, though- check the Darth 64 thread, that one is TINY
Re: Joystick mod
I wasn't really recommending it (as i used to have one and they are really uncomfortable to use).
Your initial plan with the madcatz will work, although i am not sure about the size of the board (looks like it'll be pretty big to me).
Your initial plan with the madcatz will work, although i am not sure about the size of the board (looks like it'll be pretty big to me).
Making stuff with my new beautiful CNC machine!
Would you like a professional looking custom case for your portable? I may be able to help you. Check out this link:
http://forums.benheck.com/viewtopic.php?f=13&t=32724
Would you like a professional looking custom case for your portable? I may be able to help you. Check out this link:
http://forums.benheck.com/viewtopic.php?f=13&t=32724
-
thewise1
- Portablizer Extraordinaire
- Posts: 1413
- Joined: Sun Jan 04, 2009 8:18 pm
- Location: Sitting on my pile of authentic minnesota dirt
Re: Joystick mod
Yeah I wanted the madcatz one because it had turbo and mario party button mashing games would have been hard on my portable. But the other one in this thread also has it. So great!!64M320N3 wrote:I wasn't really recommending it (as i used to have one and they are really uncomfortable to use).
Your initial plan with the madcatz will work, although i am not sure about the size of the board (looks like it'll be pretty big to me).
Re: Joystick mod
Great.
Have fun.
Making stuff with my new beautiful CNC machine!
Would you like a professional looking custom case for your portable? I may be able to help you. Check out this link:
http://forums.benheck.com/viewtopic.php?f=13&t=32724
Would you like a professional looking custom case for your portable? I may be able to help you. Check out this link:
http://forums.benheck.com/viewtopic.php?f=13&t=32724





